Torbay · England
Bath Re-enamelling in Brixham
Bath re-enamelling across Brixham and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
Our work in Brixham
Brixham is about 4 miles south-east of Paignton, in Torbay. Clients in Brixham get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. We cover 23 places across Torbay, from the larger towns to small villages.
Every address in TQ5 is within our area, from the main roads to the quietest streets. From Penpethy Close, Lower Manor Road and Brookdale Close or a nearby road, we can come to you. Being close to the A3022, Brixham is simple for us to get to. If you are just outside Brixham, we cover Hillhead (2 miles south-west), Galmpton (2 miles west), Kingswear (4 miles south-west), Dartmouth (4 miles south-west) and Warfleet (4 miles south-west). Larger places within reach include Paignton (4 miles north-west), Torquay (6 miles north), Ellacombe (5 miles north), Babbacombe (5 miles north), Torre (5 miles north) and St Marychurch (6 miles north).
Near you in Brixham
In Brixham, that means homes near Brixham College, Golden Lion pub and Church of St Mary the Virgin. Brixham’s nearest station is Paignton station, about 3.5 miles north-west. Other landmarks nearby include Brixham Community Hospital (within half a mile south-east) and Kingswear Castle (3.9 miles south-west).
About our bath re-enamelling in Brixham
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on cast iron baths, Victorian roll-tops and acrylic baths, and people most often call us about brown or grey marks that don’t clean off and wear marks under the taps.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Location
- Brixham (TQ5)
- County
- Torbay
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Brixham
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Contact us if you’ve noticed any of these:
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- Stains that will not shift
- A bath that stays dull however much you clean it
What your quote should include
- What aftercare is recommended
- Whether the price covers travel
- What preparation is included
- A fixed quote, and whether VAT is included
Looking after it afterwards
Aftercare is simple:
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Other services in Brixham
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
When we would advise against a repair
A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Landlord and trade work in Brixham
Landlords, letting agents and housing providers in Brixham use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which typically takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Let the surface dry out before the visit
- Clear the area around the damage
- Keep children and pets away from the room on the day
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Brixham: your questions answered
How do I book?
Use the quote form or ring 0345 017 0787.
Are there extra charges for Brixham?
No. Our quotes include travel, with the same prices everywhere we work.
Do you cover the whole of Torbay?
We cover the whole UK, including Brixham and the rest of Torbay. Just include your postcode and we’ll offer you dates.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
How do I get a price for bath re-enamelling in Brixham?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up and a photo of the whole item with your TQ5 postcode.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Brixham customers choose us
- Dust sheets down, tidy finish
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
Take a look at our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
