Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Blackmoor, Bath and North East Somerset
Fixed-price bath re-enamelling in Blackmoor and the surrounding area, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Stains that will not shift
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
How we handle bath re-enamelling in Blackmoor
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair pressed steel baths, Victorian roll-tops and acrylic baths, and people most frequently call us about a coloured bath you want in white and worn patches where water runs and sits.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Area
- Blackmoor (BS40)
- County
- Bath and North East Somerset
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Blackmoor
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Signs it’s time to call us include:
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
- A coating lifting around the plughole
- A bath in a colour that no longer suits
Questions to ask before you book
- Whether they match the colour on site
- How to care for the finish
- Whether cleaning and preparation are in the price
- What the guarantee covers, and for how long
Landlord and trade work in Blackmoor
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
How it works
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. It normally takes the best part of a day, and you can get on with other things while we’re there.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the day after.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
- Open a window if you can
Get a quote
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Questions from Blackmoor
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
About Blackmoor
Blackmoor is about 6 miles south of Nailsea, in Bath and North East Somerset. Our technicians come to clients in Blackmoor, so there is no workshop to go to. We cover 136 places across Bath and North East Somerset.
Every address in BS40 is covered, from the main roads to the quietest streets. You will find streets such as Blackmoor and Greenwell Lane, and we cover them all. We also travel to Lower Langford (1 mile south-east), Stock (1 mile north-west), Havyatt Green (1 mile east), Upper Langford (1 mile south) and Churchill (1 mile south-west). Within a short drive, we also cover Keynsham (13 miles east), Paulton (12 miles east), Peasedown St John (15 miles east), Saltford (14 miles east), Timsbury (13 miles east) and High Littleton (11 miles east).
Landmarks near Blackmoor
Typical jobs here are in homes near Churchill Church of England Primary School, St Mary's Church and Stag & Hounds pub. The nearest railway station is Yatton station, about 4 miles north-west of the centre. A little further out are Banwell Castle (3.9 miles south-west). Open spaces near Blackmoor include Kingswood and Black Down.
Aftercare tips
After the repair has cured, a few habits help it last:
- Use washing-up liquid and a soft cloth
- Don’t let dyes or oils sit on the finish
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- Previous DIY repairs that have to come out
- What the surface is made of
- How much damage there is
- How hard the colour is to match
Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Any earlier repairs or coatings
- Natural light rather than flash
- A close-up of the damage, in focus
- One picture of the whole bath
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Nearby places to Blackmoor
Also in Blackmoor
What we cannot put right
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Blackmoor
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
