Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Stock, Bath and North East Somerset
Fixed-price bath re-enamelling in Stock and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- An outdated colour you’d like to change
How the visit works
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to most of the day, including clearing up.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Let us know which floor the room is on
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
Get a quote
For a price in Stock, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
About our bath re-enamelling in Stock
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on cast iron baths, basins & shower trays and pressed steel baths, and people most frequently call us about a bath that stays dull however much you clean it and chips and rust in more than one place.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Area
- Stock (BS40)
- Region
- Bath and North East Somerset
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Stock questions
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.
Repair or replace: which is better?
A replacement often means several trades over several days. Re-enamelling is one technician, normally one day, with the bath back in use the following day. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why book with us
- Every repair guaranteed for a year
- Colour mixed on the day to match
- Typically one visit, start to finish
- No extra charge for your area
Read our pricing and guide to resurfacing and replacement costs.
Also in Stock
Aftercare tips
To keep it looking its best:
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
- Don’t use the bath until it has fully cured
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Covering Stock
Stock is about 5 miles south of Nailsea, in Bath and North East Somerset. Whether you’re in the middle of Stock or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Stock is one of 136 places in Bath and North East Somerset we cover.
We cover every part of the BS40 postcode area. From Stock Lane and Duck Lane or anywhere nearby, we can come to you. We also cover the places around Stock: Blackmoor (1 mile south-east), Iwood (1 mile north), Lower Langford (1 mile south-east), Churchill (1 mile south) and Udley (1 mile north). We also work in nearby towns such as Keynsham (13 miles east), Paulton (13 miles east), Saltford (14 miles east), Timsbury (13 miles east), High Littleton (12 miles east) and Clutton (11 miles east).
Landmarks near Stock
We visit homes around Churchill Academy & Sixth Form, Stag & Hounds pub and St Mary's Church, among other places. The closest station to Stock is Yatton station, roughly 3.3 miles north-west. Further afield, we also cover the area around Banwell Museum (3.8 miles south-west) and Banwell Castle (3.6 miles south-west). Green spaces nearby include Cadbury Hill and Kingswood.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Signs you need bath re-enamelling in Stock
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
If you can see any of these, send us a photo:
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
What your quote should include
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
- What the guarantee covers, and for how long
- Whether the price covers travel
Landlords, agents and businesses in Stock
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- What the surface is made of
- What kind of damage it is
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
Before you send photos, a few simple things make all the difference:
- Any earlier repairs or coatings
- Something in shot to show the size
- A wider photo showing the whole bath
- Good light, ideally daylight, without flash glare
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
What a repair cannot fix
A repair is not always the answer, and we’d rather say so up front. Repairs will not solve:
- A bath split right through the body
- Leaks from fittings rather than the bath
- A bath that is rusted through
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
