Worcestershire · England
Bath re-enamelling & resurfacing in Blackwell, Worcestershire
Bath re-enamelling across Blackwell and nearby, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Bath re-enamelling at your home in Blackwell
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We’re often asked to fix brown or grey marks that don’t clean off and a bath that stays dull however much you clean it, in basins & shower trays, Victorian roll-tops and acrylic baths.
All our work comes with our one-year guarantee, wherever you are in Worcestershire.
- Where
- Blackwell (B60)
- Region
- Worcestershire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Blackwell
Blackwell is about 2 miles north-east of Bromsgrove, in Worcestershire. Clients in Blackwell get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We cover all 376 towns and villages in Worcestershire. We work right across the region, from Blackwell to Birmingham (10 miles away).
Postcode districts we cover here: B60. Whether you live on Station Road, Wentworth Drive and Gleneagles Drive or a nearby road, we can come to you. We also travel to Linthurst (1 mile north-west), Apes Dale (1 mile north-west), Burcot (1 mile south-west), Vigo (1 mile south) and Barnt Green (1 mile north). Larger places within reach include Worcester (14 miles south-west), Redditch (5 miles south-east), Kidderminster (10 miles west), Droitwich Spa (9 miles south-west), Stourport-on-Severn (12 miles west) and Bewdley (13 miles west).
Landmarks near Blackwell
Our clients here include homes close to Blackwell First School, North Bromsgrove High School and Church of St Catherine. For rail, the closest station is Barnt Green station, roughly 1.2 miles north-east of the centre. Nearby you’ll also find Dolan Park Hospital (1 mile south) and Castlebourne folly (4.2 miles north-west). The countryside around Blackwell includes Christopher Cadbury Wetland Reserve and Bilberry Hill.
Nearby places to Blackwell
Other services in Blackwell
Common questions in Blackwell
How do I get a price for bath re-enamelling in Blackwell?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you quote from pictures?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Aftercare tips
Looking after the surface is easy:
- Repair dripping taps early
- Don’t let dyes or oils sit on the finish
- A quick wipe after use keeps limescale away
- Do not leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
- A metal bath with a through crack
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
What we do, step by step
Your technician turns up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
Getting a price
To get a price, send two or three pictures using our quote form or ring us. We will say immediately if a repair is the right fix.
Related advice
What affects the price in Blackwell
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- The material
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- How much damage there is
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Two or three clear pictures are typically enough. It helps if you send:
- Where you are, by postcode
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- A wider photo showing the entire bath
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
When to call us in Blackwell
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
It’s worth getting a quote if you see:
- A roll-top that’s seen better days
- Wear marks under the taps
- A peeling or bubbling previous coating
- A coloured bath you want in white
What your quote should include
- Whether they match the colour on site
- If travel is included in the price
- How the room is protected while they work
- Who will actually do the work
Landlord and trade work in Blackwell
We work for landlords, letting agents and housing providers in Blackwell as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
