Somerset · England
Bath re-enamelling & resurfacing in Blagdon Hill, Somerset
Bath re-enamelling across Blagdon Hill and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
Bath re-enamelling in Blagdon Hill without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair acrylic baths, cast iron baths and Victorian roll-tops, and common reasons people get in touch are a period or roll-top bath worth keeping and a bath in a colour that no longer suits.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Where
- Blagdon Hill (TA3)
- Area hub
- Somerset
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
How the surface is treated afterwards matters:
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
- Do not leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Landlords, agents and businesses in Blagdon Hill
If you manage property in Blagdon Hill, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Places near Blagdon Hill
What else we do in Blagdon Hill
FAQs for Blagdon Hill
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
What happens after I send photos?
We review the pictures and send a fixed quote.
Do you work in Blagdon Hill?
Yes, we do. Repair technicians travel to Blagdon Hill from across the region, and the price is the same as everywhere else.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Are there extra charges for Blagdon Hill?
There is no separate call-out charge. The fixed quote covers the visit and the work.
The process
The work is clean and fairly quiet. We protect the area first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the next day.
Preparing for the visit
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
Common problems we fix in Blagdon Hill
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Keep an eye out for these signs:
- Worn patches where water runs and sits
- Stains that will not shift
- A peeling or bubbling previous coating
- Several chips and rust patches
What to look for in a quote
- How the room is protected while they work
- Whether a trained technician does the job
- How soon you can use it again
- What preparation is included
Repair or replace in Blagdon Hill?
A replacement often means several trades over several days. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why book with us
- We come to you, anywhere in the UK
- One price list for the entire UK
- Fixed prices from your photos
- One-year guarantee on every repair
Read our pricing and guide to resurfacing and replacement costs.
Honest limits
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Blagdon Hill
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Blagdon Hill and the surrounding area
Blagdon Hill is about 4 miles south of Taunton, in Somerset. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Our repair technicians cover all 640 towns and villages in Somerset.
We cover every part of the TA3 postcode area and the streets around it. Other places close to Blagdon Hill include Woodram (1 mile north-east), Pitminster (1 mile north), Poundisford (2 miles north), Staplehay (2 miles north) and Trull (3 miles north). Further out, we also cover Taunton (4 miles north), Bridgwater (13 miles north-east), Chard (9 miles south-east), Wellington (5 miles west), Crewkerne (15 miles east) and Sydenham (13 miles north-east).
What’s near Blagdon Hill
We visit homes around Lamb And Flag Inn and Blagdon Hill United Reformed Church, among other places. The closest station to Blagdon Hill is Taunton station, roughly 4.7 miles north. Well-known places in the area include Musgrove Park Hospital (3.9 miles north) and Post Office Telecommunications Museum (3.9 miles north). Green spaces nearby include Staple Hill and Bishopswood Meadows.
About our accreditations · Every repair comes with a one-year guarantee.
