Lincolnshire · England
Bath Re-enamelling for Blankney homes
Full bath re-enamelling and resurfacing in Blankney, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- An old resurfacing that is failing
Bath re-enamelling in Blankney, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. We work on basins & shower trays, cast iron baths and pressed steel baths, and common reasons people get in touch are lots of chips and rust spots and enamel that’s lost its shine and feels rough.
All our work is covered by our one-year guarantee.
- Where
- Blankney (LN4)
- Area hub
- Lincolnshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- Access to the area
- How many areas need work
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed quote
You can usually get a fixed price without us visiting. To help us price it:
- Something in shot to show the size
- Where you are, by postcode
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Also near Blankney
More services for Blankney
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a full day in most cases. We leave the room clean and you’ll know when it can be used.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the day after.
Preparing for the visit
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Ensure the area is dry
Ask for a price
If you’re in Blankney and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- Have chips seen to early
- Clean with a soft cloth and mild detergent
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Questions from Blankney
Do you cover the whole of Lincolnshire?
We work UK-wide. Prices do not change with location.
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
What happens once I’ve sent photos?
You get a fixed price and available dates. If we need another angle, we will ask.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
How long does re-enamelling take?
Generally one day, with the bath ready the following day. A badly pitted bath can need a second day.
Can you fix a peeling bath coating?
Normally, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
What we cannot put right
We will not take on work that will not last, so these are the limits:
- A bath split right through the body
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Common problems we fix in Blankney
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
The things customers typically mention when they call include:
- Brown or grey marks that do not clean off
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
Questions to ask before you book
- Who turns up on the day
- What prep work is covered
- What happens if the damage is worse than the photos show
- How your room will be protected
Should you replace it?
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day. Prices start from £350. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Blankney clients choose us
- CHAS, Constructionline and SafeContractor accredited
- Work done at your home or business
- No extra charge for your area
- Colour mixed on the day to match
Read our full price list or bath cost comparison.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Blankney and the surrounding area
Blankney is about 9 miles south-east of North Hykeham, in Lincolnshire. Jobs in Blankney are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We cover 732 places in Lincolnshire. Our nearest city page is Leeds, about 67 miles away.
Here we cover the LN4 postcode area. We also cover the places around Blankney: Scopwick (1 mile south), Metheringham (1 mile north), Dunston (2 miles north), Nocton (3 miles north) and Potterhanworth (4 miles north). Larger places within reach include Lincoln (9 miles north-west), Sleaford (9 miles south), North Hykeham (9 miles north-west), Horncastle (14 miles north-east), Birchwood (10 miles north-west) and Woodhall Spa (8 miles east).
Around Blankney
Our customers here include homes close to The Metheringham Primary School and Church of St Oswald and the streets around them. The closest station to Blankney is Metheringham station, about 1.2 miles north-east. Well-known places in the area include Metheringham Airfield Visitor Centre (2.3 miles east).
About our accreditations · Every repair comes with a one-year guarantee.
