Gloucestershire · England
Bath Re-enamelling in Bledisloe
Problem with your bath in Bledisloe? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Wear marks under the taps
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Bledisloe
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We work on cast iron baths, acrylic baths and pressed steel baths, and common reasons people get in touch are enamel that’s lost its shine and feels rough and a peeling or bubbling previous coating.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Location
- Bledisloe (GL15)
- Area hub
- Gloucestershire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A bath that is rusted through
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Bledisloe
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- No need to remove anything
- Every repair guaranteed for a year
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
Read our pricing and resurfacing vs replacement cost guide.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Keep a parking space free if you can
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
Getting a price
Email us a picture of the damage and a wider shot of the entire item, with your GL15 postcode, and we will come back with a fixed quote.
Related advice
What affects the price in Bledisloe
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- The type of damage
- Whether we combine several jobs
- How many areas need work
- The material and finish
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Before you send pictures, a few simple things make all the difference:
- Any details about the material
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- Your postcode, so we can check dates
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Landlords, agents and businesses in Bledisloe
If you manage property in Bledisloe, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Looking after it afterwards
It’s all simple stuff:
- Store bottles off the bath
- Respect the curing time we give you
- Avoid suction-cup mats
- Get any chip repaired quickly
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
FAQs for Bledisloe
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you cover the entire of Gloucestershire?
The entire UK, including all of Gloucestershire. Send your postcode with your photos and we will offer you dates.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Signs you need bath re-enamelling in Bledisloe
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Signs it’s time to call us include:
- Staining under the taps and around the waste
- Wear marks under the taps
- Several chips and rust patches
- An outdated colour you’d like to change
Comparing quotes
- Who will actually do the work
- Whether the colour is mixed to match
- What protection goes down before work starts
- How changes to the job are handled
Towns and villages near Bledisloe
More services for Bledisloe
Bledisloe and nearby
Bledisloe is about 9 miles west of Quedgeley, in Gloucestershire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Our repair technicians cover 470 places in Gloucestershire, from the larger towns to small villages. Our jobs stretch from Bledisloe to Birmingham (54 miles away).
Jobs in GL15 work the same way as everywhere else we cover. You will find streets such as Chicknalls Lane and Howell's Lane, and we cover them all. Neighbouring places we cover include Ayleford (1 mile west), Blakeney (1 mile south-west), Brain's Green (2 miles south-west), Awre (2 miles east) and Upper Soudley (2 miles north-west). We also work in nearby towns such as Gloucester (11 miles north-east), Stroud (10 miles east), Brockworth (14 miles east), Quedgeley (9 miles north-east), Lydney (4 miles south-west) and Innsworth (14 miles north-east).
What’s near Bledisloe
Locally, our jobs take us to homes close to Church of All Saints, among other places. Nearby you will also find Dilke Memorial Hospital (3.3 miles north-west) and Bledisloe Tump (less than half a mile south-east). The countryside around Bledisloe includes WWT Slimbridge.
About our accreditations · Every repair comes with a one-year guarantee.
