Gloucestershire · England
Bath re-enamelling & resurfacing in Awre, Gloucestershire
Problem with your bath in Awre? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Lots of chips and rust spots
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Don’t leave a chip unrepaired
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Bath re-enamelling at your home in Awre
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a coating lifting around the plughole and staining under the taps and around the waste, on pressed steel baths, acrylic baths and basins & shower trays.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Where
- Awre (GL14)
- County
- Gloucestershire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Awre: your questions answered
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Can you repair something that is been repaired before?
Generally, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Are there extra charges for Awre?
No. Our quotes include travel, with the same prices everywhere we work.
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes the best part of a day for most jobs. We leave the room clean and you’ll know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Keep a parking space free if you can
- Make sure the room can be ventilated
- Let the surface dry out before the visit
Get a quote
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Our work in Awre
Awre is about 7 miles south-west of Quedgeley, in Gloucestershire. Jobs in Awre are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Awre is one of 470 places in Gloucestershire where we work. We work right across the region, from Awre to Birmingham (53 miles away).
Our technicians cover all of GL14 and the streets around it. Streets in the area include Northington Lane and Woodend Lane. We also cover the places around Awre: Arlingham (2 miles north), Bledisloe (2 miles west), Blakeney (3 miles south-west), Ayleford (3 miles west) and Brain's Green (3 miles west). Larger places within reach include Gloucester (10 miles north-east), Stroud (9 miles east), Brockworth (12 miles north-east), Quedgeley (7 miles north-east), Lydney (5 miles south-west) and Innsworth (13 miles north-east).
What’s near Awre
In Awre, that means homes near The Red Hart (Public House) and Church of St Andrew. For rail, the closest station is Cam & Dursley station, roughly 4.9 miles south-east of the centre. A little further out are Dilke Memorial Hospital (4.8 miles north-west) and Bledisloe Tump (1.5 miles west). The countryside around Awre includes WWT Slimbridge.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- The material and finish
- Where the damage is and how we get to it
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- What it’s made of, if you know
- Natural light rather than flash
- Details of any past repairs
- Your postcode, so we can check dates
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Honest limits
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Do you need bath re-enamelling in Awre?
Often the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is normally perfectly sound.
If you can see any of these, send us a picture:
- Brown or grey marks that do not clean off
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
- Thin, worn enamel in places
What to look for in a quote
- How to care for the finish
- Whether a trained technician does the job
- How changes to the job are handled
- The length of the guarantee and what it covers
Towns and villages near Awre
More services for Awre
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
What you get with us
- Colours mixed by hand to suit your surface
- No extra charge for your area
- Honest advice, even when it means no job
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page or resurfacing vs replacement cost guide.
For landlords and businesses
Landlords, letting agents and housing providers in Awre use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
About our accreditations · Every repair comes with a one-year guarantee.
