Oxfordshire · England
Bath Re-enamelling for Blewbury homes
Full bath re-enamelling and resurfacing at your home in Blewbury, with a one-year guarantee on every repair.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Blewbury. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- A year’s guarantee on all work
- One visit for most repairs
- Work done at your home or business
- We’ll tell you if it’s not worth repairing
See our full price list or bath cost comparison.
Bath re-enamelling at your home in Blewbury
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We are often asked to fix a coating lifting around the plughole and a bath that stays dull however much you clean it, on basins & shower trays, Victorian roll-tops and cast iron baths.
Big or small, it’s backed by a one-year guarantee.
- Area
- Blewbury (OX11)
- Region
- Oxfordshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to the best part of a day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Open a window if you can
- Let the surface dry out before the visit
- Let us know if it has been repaired before
Getting a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Related advice
What we are called out for in Blewbury
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The things clients typically mention when they call are:
- Lots of chips and rust spots
- An old resurfacing that is failing
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
Questions to ask before you book
- What prep work is covered
- Who will actually do the work
- What aftercare is recommended
- How your room will be protected
FAQs for Blewbury
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Do you cover the whole of Oxfordshire?
Everywhere in the UK, Blewbury included. There is no extra charge for travel.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and we’ll quote them together.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
About Blewbury
Blewbury is about 3 miles south of Didcot, in Oxfordshire. Our repair technicians come to clients in Blewbury, so nothing has to leave your home. Blewbury is one of 443 places in Oxfordshire where we work. Our jobs stretch from Blewbury to London (about 49 miles away).
Postcode districts we cover here: OX11. Streets in the area include Church Road, London Road and Church End, and we cover them all. Neighbouring places we cover include Woodway (1 mile south), Upton (1 mile north-west), Aston Tirrold (1 mile east), East Hagbourne (2 miles north) and West Hagbourne (2 miles north-west). Within a short drive, we also cover Oxford (12 miles north), Didcot (3 miles north), Abingdon-on-Thames (8 miles north), Wantage (8 miles west), Henley-on-Thames (14 miles east) and Grove (9 miles west).
Local landmarks in Blewbury
Locally, our jobs take us to homes close to Blewbury Endowed Church of England Primary School, Church of St Michael and The Load of Mischief pub and the streets around them. The nearest railway station is Didcot Parkway station, about 2.9 miles north. Well-known places in the area include Brightwell Castle (4.1 miles north-east) and Atlas Computer Laboratory (3.5 miles west). Not far away are Mowbray Fields and Churn Hill.
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:
- The material
- Whether we combine several jobs
- How many areas need work
- How hard the colour is to match
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- The material, if you know it
- One sharp close-up of the damage
- One picture of the entire bath
- Something in shot to show the size
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Looking after it afterwards
To keep it looking its best:
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Places near Blewbury
Other services in Blewbury
About our accreditations · Every repair comes with a one-year guarantee.
