Oxfordshire · England
Bath Re-enamelling for Coscote homes
Bath re-enamelling for Coscote, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
Common questions in Coscote
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
What happens once I’ve sent pictures?
You will get a fixed quote back. There is no obligation to book.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How do I get a price for bath re-enamelling in Coscote?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
What areas do you cover?
Everywhere in the UK, Coscote included. Travel is included in the price.
Bath re-enamelling in Coscote without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for a bath in a colour that no longer suits and chips and rust in more than one place, on pressed steel baths, Victorian roll-tops and acrylic baths.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Location
- Coscote (OX11)
- County
- Oxfordshire
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Nearby places to Coscote
More services for Coscote
Work for landlords and builders
For anyone letting property in or around Coscote, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
What we do, step by step
We begin by going over the job with you. After that, protection goes down around the work area and we start. It normally takes the best part of a day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Clear the area around the damage
- Let the surface dry out before the visit
- Make sure the room can be ventilated
How to get a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Do you need bath re-enamelling in Coscote?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
What to look for in a quote
- Aftercare advice
- The length of the guarantee and what it covers
- What happens if they find more damage
- What preparation is included
About Coscote
Coscote is about 1 mile south of Didcot, in Oxfordshire. Wherever you are in the OX11 postcode area, a technician comes to you. We work in 443 places across Oxfordshire, from the larger towns to small villages. We work right across the region, from Coscote to London (about 50 miles away).
Our visits in OX11 are booked in the same way as anywhere else. We also travel to West Hagbourne (1 mile south-west), East Hagbourne (1 mile east), Upton (1 mile south), Harwell (2 miles west) and Blewbury (2 miles south-east). Within a short drive, we also cover Oxford (11 miles north), Abingdon-on-Thames (6 miles north), Wantage (7 miles west), Grove (7 miles west), Faringdon (15 miles west) and Benson (7 miles east).
Around Coscote
Around Coscote, we work in homes near St Birinus School, UTC Oxfordshire and Hagbourne Church of England Primary School, among other places. Also close by are Fleur De Lys Public House (0.6 miles east) and Church of St Andrew (0.5 miles east). The nearest railway station is Didcot Parkway station, roughly 1.5 miles north. Nearby you will also find Brightwell Castle (4.1 miles east) and Atlas Computer Laboratory (2.8 miles south-west). For a walk, there is Mowbray Fields and Churn Hill.
What affects the price in Coscote
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- What kind of damage it is
- How easy the damage is to reach
- Any earlier repairs that need removing first
- How many areas need work
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
When you take your pictures, a few simple things make all the difference:
- The material, if you know it
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
For a price in Coscote, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
What we cannot put right
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Repair or replace in Coscote?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why Coscote customers choose us
- Honest advice, even when it means no job
- Normally one visit, start to finish
- A fixed quote before you book
- Dust sheets down, tidy finish
See our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
