Cumbria · England

Bath Re-enamelling in Blitterlees

Problem with your bath in Blitterlees? We repair it in place, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Blitterlees homes

Bath re-enamelling in Blitterlees without replacing anything

Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We’re frequently asked to fix a coating lifting around the plughole and wear marks under the taps, in cast iron baths, basins & shower trays and pressed steel baths.

Big or small, you get the same one-year guarantee.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Blitterlees (CA7)
Region
Cumbria
Warranty
One year on every repair
Price
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Looking after it afterwards

Much of the damage we repair could have been avoided. A few tips:

  • Never use suction bath mats
  • Respect the curing time we give you
  • Repair dripping taps early
  • Dry the bath after use to stop limescale

Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.

On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.

What happens on the day

We turn up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Keep a parking space free if you can
  • Tell us about any previous repairs or coatings
  • Have a window or extractor fan available

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.

Send pictures for a quote

Read more

Our work in Blitterlees

Blitterlees is about 11 miles south-west of Annan, in Cumbria. Whether you are in the middle of Blitterlees or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Blitterlees is one of 438 towns and villages in Cumbria we cover. Our nearest city page is Newcastle upon Tyne, about 70 miles away.

Our visits in CA7 are booked in the same way as anywhere else. Close by, we cover Greenrow (1 mile north-east), Silloth (1 mile north), Skinburness (2 miles north), Abbeytown (4 miles east) and Allonby (6 miles south). We also work in nearby towns such as Maryport (11 miles south-west), Cockermouth (13 miles south), Wigton (9 miles east), Seaton (15 miles south), Ewanrigg (11 miles south) and Aspatria (7 miles south).

Local landmarks in Blitterlees

Our customers here include homes close to Cumberland Inn, Solway Community School and Christ Church and the streets around them. Nearby you will also find Soldiers in Silloth (1.1 miles north) and Moated site of Wolsty Castle (0.9 miles south).

Map of Blitterlees © OpenStreetMap contributors

Materials and what they mean for the repair

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Common problems we fix in Blitterlees

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.

You may need us if you’ve spotted:

  • An outdated colour you’d like to change
  • A coating lifting around the plughole
  • Worn patches where water runs and sits
  • Stains that will not shift

Before booking anyone

  • Whether the price covers travel
  • How the colour is matched
  • Aftercare advice
  • The length of the guarantee and what it covers

10 questions to ask before booking

When a repair isn’t the answer

A few problems are outside what a surface repair can do:

  • Leaks from fittings rather than the bath
  • Problems we can’t see until an old finish comes off
  • Steel that has corroded right through

Send us photos and we will tell you honestly.

What we work on

  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays

Repair or replace in Blitterlees?

A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.

Why book with us

  • Colours mixed by hand to suit your surface
  • We come to you, anywhere in the UK
  • Typically one visit, start to finish
  • CHAS and Constructionline accredited

See our full price list and guide to resurfacing and replacement costs.

Blitterlees: your questions answered

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

Will the new finish last?

Care for it and it lasts. Avoid abrasive cleaners and suction mats.

Is my repair covered?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Is there a smell?

Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What happens once I’ve sent pictures?

We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.

Someone resurfaced my bath and it’s peeling. Can you help?

In most cases. The old coating comes off before we resurface it. Mention it when you send photos.

How soon can you come?

We will give you dates with your quote. Tell us if you need it done quickly.

For landlords and businesses

We work for landlords, letting agents and housing providers in Blitterlees as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

We carry out planned and one-off repairs for housing associations and facilities teams in Cumbria and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

DIY repairs versus a professional job

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.