Gloucestershire · England
Bath re-enamelling & resurfacing in Blockley, Gloucestershire
Bath re-enamelling for Blockley, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A coloured bath you want in white
- A roll-top that’s seen better days
About our bath re-enamelling in Blockley
We don’t move the bath, so your taps, tiles and plumbing are left alone. It typically takes one visit, with the bath ready to use the following day. If you’re dealing with a coloured bath you want in white and wear marks under the taps, we can normally put it right, on pressed steel baths, acrylic baths and Victorian roll-tops alike.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Blockley (GL56)
- Region
- Gloucestershire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Don’t let dyes or oils sit on the finish
- Do not leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
- Repair dripping taps early
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
When to call us in Blockley
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Signs it’s time to call us include:
- A roll-top that is seen better days
- Chips and rust in more than one place
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
Before booking anyone
- How soon you can use it again
- How changes to the job are handled
- Whether the colour is mixed to match
- Aftercare advice
Common questions in Blockley
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Which areas do you work in?
Everywhere in the UK, Blockley included. There’s no extra charge for travel.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
The process
You do not need to empty the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take most of the day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the day after.
Getting ready for the visit
- Let us know which floor the room is on
- Clear the area around the damage
- Let us know about parking or access
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Related advice
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- The colour and finish to match
- Where the damage is and how we get to it
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from photos
Photographing the damage takes a minute. Please include:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- A close-up of the damage, in focus
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
What you get with us
- Colour mixed on the day to match
- CHAS and Constructionline accredited
- Work done at your home or business
- We will tell you if it’s not worth repairing
See our full price list and bath cost comparison.
Places near Blockley
What else we do in Blockley
Blockley and the surrounding area
Blockley is about 9 miles south-east of Evesham, in Gloucestershire. Across the GL56 area, a technician comes to you. We work in all 470 towns and villages in Gloucestershire, from the larger towns to small villages. Our jobs stretch from Blockley to Birmingham (about 32 miles away).
We cover every part of the GL56 postcode area and the streets around it. You will find streets such as Station Road, High Street and Mill View. Other places close to Blockley include Draycott (1 mile north-east), Northwick Park (1 mile north), Paxford (2 miles north-east), Broad Campden (2 miles north) and Aston Magna (2 miles east). Larger places within reach include Bishop's Cleeve (14 miles west), Fairview (15 miles south-west), Pittville (15 miles south-west), Whaddon (15 miles south-west), Moreton-in-Marsh (3 miles south-east) and Winchcombe (10 miles south-west).
Landmarks near Blockley
Around Blockley, we work in homes near Church of St Peter and St Paul and Blockley Church of England Primary School and the streets around them. The nearest railway station is Moreton-In-Marsh station, about 3 miles south-east. Further afield, we also cover the area around Aston Magna Bygones Museum (2 miles east). For a walk, there is Seven Wells Hill.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
We carry out planned and one-off repairs for housing associations and facilities teams in Gloucestershire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
