Gloucestershire · England
Bath Re-enamelling for Moreton-in-Marsh homes
Full bath re-enamelling and resurfacing for homes and businesses in Moreton-in-Marsh and across Gloucestershire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
How it works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
Preparing for the visit
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Bath re-enamelling in Moreton-in-Marsh, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include lots of chips and rust spots and a bath in a colour that no longer suits, across Victorian roll-tops, acrylic baths and cast iron baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Moreton-in-Marsh (GL56)
- Area hub
- Gloucestershire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Moreton-in-Marsh and nearby
Moreton-in-Marsh is about 13 miles south-east of Evesham, in Gloucestershire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover all 470 towns and villages in Gloucestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 34 miles away.
Jobs in GL56 are booked in the same way as anywhere else. Local streets include London Road, Station Road and High Street, all of which we cover. Moreton-in-Marsh sits on or near the A44 and A429, which makes travel easy. Neighbouring places we cover include Evenlode (3 miles south-east), Barton-on-the-Heath (3 miles east), Chastleton (3 miles south-east), Little Compton (4 miles south-east) and Adlestrop (4 miles south-east). Within a short drive, we also cover Winchcombe (12 miles west), Bourton-on-the-Water (8 miles south), Chipping Campden (6 miles north-west), Stow-on-the-Wold (4 miles south), Upper Rissington (8 miles south) and Woodmancote (15 miles west).
Local landmarks in Moreton-in-Marsh
Our customers here include homes close to St David's Church of England Primary School, The Wellington Inn and Congregational Church, among other places. There is a railway station in Moreton-in-Marsh itself: Moreton-In-Marsh station. Other landmarks nearby include Wellington Aviation Museum (0.5 miles west) and Wheelbarrow Castle (3.6 miles east).
Landlord and trade work in Moreton-in-Marsh
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Moreton-in-Marsh: your questions answered
Is there any odour?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
How do I get a price for bath re-enamelling in Moreton-in-Marsh?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we will ask for another angle.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Do you cover the entire of Gloucestershire?
Everywhere in the UK, Moreton-in-Marsh included. Travel is included in the price.
Towns and villages near Moreton-in-Marsh
What else we do in Moreton-in-Marsh
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why book with us
- One visit for most repairs
- Straight answers about what a repair can do
- Nothing taken out or refitted
- Colour-matched on site
Read our full price list or bath cost comparison.
How to look after the repair
Simple care helps the repair last. We recommend:
- Dry the bath after use to stop limescale
- Don’t let dyes or oils sit on the finish
- Respect the curing time we give you
- Store bottles off the bath
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- What the surface is made of
- The size and number of damaged areas
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
It only takes a minute to photograph the damage. Try to send:
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- One sharp close-up of the damage
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
When a repair isn’t the answer
We’d rather lose a job than do one that won’t last, so these are the limits:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Moreton-in-Marsh
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
