Gloucestershire · England
Bath Re-enamelling in Paxford
Bath re-enamelling in Paxford without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
Paxford questions
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What areas do you cover?
All of Gloucestershire, and the rest of the UK. There’s no extra charge for travel.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Do you work in Paxford?
Yes, we do. Technicians travel to Paxford from across the region, with no extra charge for travel.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Bath re-enamelling at your home in Paxford
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s a period or roll-top bath worth keeping and stains that won’t shift, we can normally put it right.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Paxford (GL55)
- Region
- Gloucestershire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Paxford. The price reflects:
- The size and number of damaged areas
- The type of damage
- How easy the damage is to reach
- The material and finish
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Getting a price from photos
Good photos mean an accurate price. Here’s what we find most useful:
- What it’s made of, if you know
- One picture of the whole bath
- Your postcode, so we can check dates
- Natural light rather than flash
For a price in Paxford, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Paxford and the surrounding area
Paxford is about 10 miles south-east of Evesham, in Gloucestershire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Paxford is one of 470 places in Gloucestershire we cover. You can also see our page for Birmingham, about 31 miles away.
We cover every part of GL55 and the streets around it. If you are just outside Paxford, we cover Draycott (1 mile south), Northwick Park (1 mile west), Aston Magna (1 mile south-east), Broad Campden (2 miles west) and Ebrington (2 miles north). Larger places within reach include Bishop's Cleeve (15 miles west), Moreton-in-Marsh (3 miles south-east), Winchcombe (11 miles south-west), Bourton-on-the-Water (10 miles south), Stow-on-the-Wold (7 miles south) and Upper Rissington (11 miles south).
Landmarks near Paxford
Around Paxford, we work in homes near Chipping Campden School and Paxford Mission Church and the streets around them. For rail, the closest station is Moreton-In-Marsh station, about 3.2 miles south-east of the centre. Well-known places in the area include Aston Magna Bygones Museum (1.2 miles south-east) and Ellen Badger Hospital (5.1 miles north-east). The countryside around Paxford includes Dover's Hill.
Landlords, agents and businesses in Paxford
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Towns and villages near Paxford
Other services in Paxford
How to look after the repair
Most damage we see is avoidable. A few tips:
- Don’t let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
- Fix dripping taps quickly
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Should you replace it?
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day, with the bath back in use the following day. Prices start from £350. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with nothing added on the day.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
- Honest advice, even when it means no job
- Colour mixed on the day to match
Take a look at our full price list and bath cost comparison.
Honest limits
Before you book, it’s worth knowing the limits too:
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
How the visit works
Arrival times are agreed in advance. On site, it takes the best part of a day. The room is left tidy and you’ll know when it can be used.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
How to prepare
- Mention if the room is upstairs or in a flat
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Related advice
Signs you need bath re-enamelling in Paxford
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Keep an eye out for any of the following:
- Worn patches where water runs and sits
- Lots of chips and rust spots
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
Questions to ask before booking
- What preparation is included
- How your room will be protected
- Aftercare advice
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
