Worcestershire · England

Bath Re-enamelling in Bockleton

Our repair technicians come to Bockleton for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • Brown or grey marks that do not clean off
  • A roll-top that is seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Bockleton

Bath re-enamelling in Bockleton, done in place

Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Taps, tiles, panels and plumbing all stay in place. Our repair technicians work on pressed steel baths, acrylic baths and Victorian roll-tops, and the jobs we see most are worn patches where water runs and sits and a bath in a colour that no longer suits.

We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.

Technician in a mask working on a freestanding roll-top bath
Location
Bockleton (WR15)
Region
Worcestershire
Cover
A year, on every repair
Quotes
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

For landlords and businesses

For anyone letting property in or around Bockleton, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Covering Bockleton

Bockleton is about 15 miles north of Hereford, in Worcestershire. Across the WR15 area, we come to you. Bockleton is one of 376 towns and villages in Worcestershire where we work. We work right across the region, from Bockleton to Birmingham (33 miles away).

All of WR15 is covered. Close by, we cover Kyre (2 miles north-east), Nineveh (3 miles north-east), Bank Street (3 miles east), Grendon Green (3 miles south) and Oldwood (3 miles north). We also work in nearby towns such as Great Malvern (15 miles south-east), Stourport-on-Severn (15 miles north-east), Bewdley (15 miles north-east), Malvern (15 miles south-east), Dines Green (15 miles east) and Link Top (15 miles south-east).

Landmarks near Bockleton

Around Bockleton, we work in homes near Church of St Michael. Well-known places in the area include Laysters Motte (1.7 miles north-west).

Map of Bockleton © OpenStreetMap contributors

Do you need bath re-enamelling in Bockleton?

Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.

Keep an eye out for these signs:

  • A dull, rough surface that will not come clean
  • Brown or grey marks that don’t clean off
  • A coating lifting around the plughole
  • A period or roll-top bath worth keeping

Questions to ask before booking

  • The length of the guarantee and what it covers
  • What aftercare is recommended
  • A fixed quote, and whether VAT is included
  • Whether the price covers travel

How to compare quotes

Repair or replace: which is better?

When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why Bockleton clients choose us

  • Normally one visit, start to finish
  • Rooms protected and left tidy
  • CHAS and Constructionline accredited
  • No extra charge for your area

Read our prices page and resurfacing vs replacement cost guide.

DIY kit or professional repair?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

What we do, step by step

You don’t need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. Most jobs take most of the day, and you can get on with other things while we’re there.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the next day.

How to prepare

  • Keep pets and children out of the room while we work
  • Tell us about any previous repairs or coatings
  • Make sure the area is dry

Getting a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Get a fixed price

Advice

What bath re-enamelling costs

Prices start from £350. We don’t charge extra for travel to Bockleton. The price depends on:

  • How many areas need work
  • Unusual colours or finishes
  • Whether it’s a chip, crack, burn or wear
  • How easy the damage is to reach

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Getting a price from pictures

It only takes a minute to photograph the damage. Please include:

  • Natural light rather than flash
  • Details of any past repairs
  • Something in shot to show the size
  • A clear, close picture of the problem area

The quickest way to a price is to send two or three photos using our quote form or ring us. We will say right away if a repair is the right fix.

FAQs for Bockleton

How long will the bath be out of use?

Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside if you’d like.

Do you cover Bockleton?

Yes. We cover the entire UK and come to Bockleton. Send pictures and we will quote, or call 0345 017 0787.

What happens next?

We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.

How durable is a resurfaced bath?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

Can you repair something that’s been repaired before?

Yes, we frequently do. It can add a little time, which we include in the quote.

How much does bath re-enamelling cost in Bockleton?

Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up and a picture of the entire item with your WR15 postcode.

Can you fix a peeling bath coating?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Problems we cannot see until an old finish comes off
  • Acrylic that moves when you stand in it
  • Steel that has corroded right through

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.