Worcestershire · England
Bath re-enamelling & resurfacing in Bank Street, Worcestershire
Full bath re-enamelling and resurfacing in Bank Street, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Several chips and rust patches
Work for landlords and builders
For anyone letting property in or around Bank Street, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Bath re-enamelling in Bank Street without replacing anything
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. If you’re dealing with a bath that stays dull however much you clean it and a coloured bath you want in white, we can typically put it right.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Bank Street (WR15)
- Area hub
- Worcestershire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
- Ensure the area is dry
Getting a price
Send us pictures of the damage and one of the entire item, and tell us you’re in Bank Street, and we’ll reply with a fixed price.
Advice
About Bank Street
Bank Street is about 12 miles south-west of Stourport-on-Severn, in Worcestershire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Bank Street is one of 376 towns and villages in Worcestershire where we work. We work right across the region, from Bank Street to Birmingham (about 31 miles away).
All of WR15 is covered. We also cover the places around Bank Street: Kyre (1 mile north-west), Nineveh (2 miles north-west), Bockleton (3 miles west), Oldwood (4 miles north-west) and Grendon Green (4 miles south-west). We also work in nearby towns such as Worcester (14 miles east), Kidderminster (15 miles north-east), Great Malvern (13 miles south-east), Stourport-on-Severn (12 miles north-east), Bewdley (12 miles north-east) and Malvern (14 miles south-east).
Landmarks near Bank Street
Our customers here include homes close to Stoke Bliss Church. Well-known places in the area include Edvin Loach Ringwork (2.9 miles south-east) and Bromyard Community Hospital (5.1 miles south). For a walk, there is Page's Pasture.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Also near Bank Street
What else we do in Bank Street
Aftercare tips
Simple care helps the repair last. We recommend:
- Leave the bath for the full curing time before using it
- Have chips seen to early
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
How we price bath re-enamelling
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- How many items we do on one visit
- The material
- Previous DIY repairs that have to come out
- The colour and finish to match
We charge the same wherever you are, with no extra for Bank Street. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
Two or three clear photos are generally enough. It helps if you send:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
When we’d advise against a repair
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Bank Street questions
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Worcestershire.
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Signs you need bath re-enamelling in Bank Street
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
People normally call us after spotting one of these:
- Lots of chips and rust spots
- An old resurfacing that’s failing
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
Questions to ask before you book
- What happens if they find more damage
- How to look after the finish
- Whether the colour is mixed to match
- Whether the price is fixed and includes VAT
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
