Nottinghamshire · England
Bath Re-enamelling for Bole homes
Damaged bath in Bole? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A roll-top that’s seen better days
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Get a quote
Most clients in Bole get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Bath re-enamelling in Bole without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Typical jobs include worn patches where water runs and sits and an old resurfacing that’s failing, across cast iron baths, Victorian roll-tops and pressed steel baths.
Every repair is covered by a one-year guarantee.
- Location
- Bole (DN22)
- Area hub
- Nottinghamshire
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your photos. What matters most is:
- Doing more than one item at once
- The colour and finish to match
- What kind of damage it is
- How much damage there is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send pictures for a quote
Phone photos are fine. Just ensure we can see:
- Any details about the material
- The postcode, so we can plan the visit
- Natural light rather than flash
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Also near Bole
More services for Bole
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
About Bole
Bole is about 2 miles south-west of Gainsborough, in Nottinghamshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 329 places in Nottinghamshire. We work right across the region, from Bole to Leeds (43 miles away).
Here we cover the DN22 postcode area. From Ducie Lane and South Street or anywhere nearby, a technician can come to you. We also cover the places around Bole: Saundby (1 mile north-west), Sturton le Steeple (2 miles south), South Wheatley (2 miles south-west), North Wheatley (2 miles west) and North Leverton with Habblesthorpe (3 miles south). Within a short drive, we also cover Worksop (14 miles west), Retford (7 miles south-west), New Ollerton (14 miles south-west), Kilton (13 miles west), Bracebridge (13 miles west) and Bawtry (10 miles north-west).
Local landmarks in Bole
We visit homes around St Martin's Church, among other places. The closest station to Bole is Gainsborough Lea Road station, about 1.9 miles north-east of the centre. Well-known places in the area include John Coupland Hospital (2.8 miles north). Green spaces nearby include Beckingham Marshes RSPB Reserve.
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, photos and access details.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Bole clients choose us
- CHAS, Constructionline and SafeContractor accredited
- One price list for the whole UK
- Rooms protected and left tidy
- Technicians who travel to you, UK-wide
Read our prices page and resurfacing vs replacement cost guide.
Aftercare tips
After the repair has cured, a few habits help it last:
- Get any chip repaired quickly
- Don’t use the bath until it has fully cured
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Common problems we fix in Bole
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
- An old resurfacing that’s failing
- A roll-top that is seen better days
Questions to ask before booking
- How your room will be protected
- How to look after the finish
- How changes to the job are handled
- Who turns up on the day
Questions from Bole
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we will quote them together.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
How long is the bath unusable?
Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.
About our accreditations · Every repair comes with a one-year guarantee.
