Nottinghamshire · England
Bath & shower resealing (mastic) in Bole, Nottinghamshire
Bath, shower and sink resealing with new mould-resistant silicone in Bole, carried out at your home and guaranteed for a year.
- Mould you cannot clean out
- Stained silicone
- Water getting behind the bath or tray
Questions from Bole
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How much does bath resealing cost in Bole?
The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
How we handle bath resealing in Bole
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, as one neat, continuous bead. We are often asked to fix silicone smeared on tiles and silicone coming away from the tiles, in kitchen worktops & sinks, baths and wet rooms.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Bole (DN22)
- Area hub
- Nottinghamshire
- Guarantee
- A year, on every repair
- Price
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Shower trays
Trays are sealed with weight on them, for the same reason.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Clean the sealant gently and regularly
- Dry the seal after bathing
- Use the extractor fan
- Let steam out after showers
Avoid scraping the joints, and do not stand bottles on the seal.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
Bole and the surrounding area
Bole is about 2 miles south-west of Gainsborough, in Nottinghamshire. Whether you are in the middle of Bole or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Bole is one of 329 places in Nottinghamshire we cover. Our nearest city page is Leeds, about 43 miles away.
All of DN22 is covered, from the main roads to the quietest streets. From Ducie Lane and South Street or anywhere nearby, a technician can come to you. Neighbouring places we cover include Saundby (1 mile north-west), Sturton le Steeple (2 miles south), South Wheatley (2 miles south-west), North Wheatley (2 miles west) and North Leverton with Habblesthorpe (3 miles south). Larger places within reach include Worksop (14 miles west), Retford (7 miles south-west), New Ollerton (14 miles south-west), Kilton (13 miles west), Bracebridge (13 miles west) and Bawtry (10 miles north-west).
Around Bole
We visit homes around St Martin's Church, among other places. The nearest railway station is Gainsborough Lea Road station, roughly 1.9 miles north-east of the centre. Well-known places in the area include John Coupland Hospital (2.8 miles north). Open spaces near Bole include Beckingham Marshes RSPB Reserve.
Resealing in Bole: why it matters
Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Bole
- No extra charge for your area
- One visit for most repairs
- Rooms protected and left tidy
- Repair technicians who travel to you, UK-wide
Read our full price list.
Places near Bole
More services for Bole
How the visit works
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. It normally takes about two hours for a bath.
- We cut out and remove all of the old sealant.
- Next we clean the joint and deal with mould.
- We dry the joint thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
Preparing for the visit
- Let us know which floor the room is on
- Have a window or extractor fan available
- Let the surface dry out before the visit
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you are under no obligation.
Related advice
When we would advise against a repair
It helps to know what we cannot do:
- Loose tiles, which need refixing first
- Gaps too big for silicone alone
- A bath or tray that moves, until its support is fixed
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Kitchen worktops & sinks
- Wet rooms
- Baths
- Shower trays & enclosures
- Basins & vanity units
Landlord and trade work in Bole
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Prices and what affects them
You won’t pay by the hour. The price depends on:
- Access to the area
- Unusual colours or finishes
- Any earlier repairs that need removing first
- The material and finish
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Before you send photos, a few simple things make all the difference:
- One picture of the entire bath or shower
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
Upload pictures of the damage and one of the whole item, and tell us you’re in Bole, and we’ll come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
