Kirklees · England
Bath Re-enamelling in Bolster Moor
Problem with your bath in Bolster Moor? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- An outdated colour you’d like to change
Bath re-enamelling in Bolster Moor, done in place
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Typical jobs include stains that won’t shift and several chips and rust patches, across basins & shower trays, acrylic baths and Victorian roll-tops.
Every job is backed for twelve months in Bolster Moor and everywhere else. If something goes wrong with the work, we come back.
- Area
- Bolster Moor (HD7)
- County
- Kirklees
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- Rooms protected and left tidy
- No need to remove anything
See our full price list or resurfacing vs replacement cost guide.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Covering Bolster Moor
Bolster Moor is about 3 miles west of Huddersfield, in Kirklees. Jobs in Bolster Moor are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Bolster Moor is one of 189 places in Kirklees we cover. Our nearest city page is Manchester, about 18 miles away.
All of HD7 is within our area. You will find streets such as Bolstermoor Road, Drummer Lane and Slades Road. If you are just outside Bolster Moor, we cover Clough Head (1 mile north-west), Scapegoat Hill (1 mile north), Lower Wellhouse (1 mile south-east), Causeway Foot (1 mile west) and Nettleton Hill (1 mile north). Within a short drive, we also cover Huddersfield (3 miles east), Dewsbury (10 miles east), Batley (11 miles north-east), Mirfield (8 miles north-east), Liversedge (9 miles north-east) and Cleckheaton (9 miles north-east).
Local landmarks in Bolster Moor
In Bolster Moor, that means homes near Colne Valley High School, Golcar Lily pub and Clough Head Junior and Infant School. For rail, the closest station is Slaithwaite station, roughly 1 mile south-west of the centre. Well-known places in the area include St. Luke's Hospital (2.5 miles east) and Piazza Centre (3.7 miles east). Open spaces near Bolster Moor include Moorside Edge.
Common problems we fix in Bolster Moor
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Send us a picture if you notice any of these:
- Chips and rust in more than one place
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
Questions to ask before you book
- How to look after the finish
- How the colour is matched
- Who turns up on the day
- How long the guarantee is and what it covers
Places near Bolster Moor
What else we do in Bolster Moor
Common questions in Bolster Moor
How do I get a price for bath re-enamelling in Bolster Moor?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens next?
You get a fixed price and available dates. If we need another angle, we will ask.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Leave the bath for the full curing time before using it
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Do not let dyes or oils sit on the finish
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
For landlords and businesses
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How we price bath re-enamelling
Resurfacing from £350. We don’t charge extra for travel to Bolster Moor. The price depends on:
- How many items we do on one visit
- The material and finish
- How much damage there is
- Any earlier repairs that need removing first
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
Phone pictures are fine. Just ensure we can see:
- A picture taken from further back
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take the best part of a day, tidy-up included.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
- Let us know if it has been repaired before
Getting a price
For a price in Bolster Moor, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
