Lancashire · England
Bath Re-enamelling for Bolton-by-Bowland homes
Bath re-enamelling in Bolton-by-Bowland without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
Bath re-enamelling in Bolton-by-Bowland without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a coating lifting around the plughole and lots of chips and rust spots, in basins & shower trays, acrylic baths and pressed steel baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Bolton-by-Bowland (BB7)
- County
- Lancashire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Why repair rather than replace?
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day, with the bath back in use the next day. Prices start from £350. Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Bolton-by-Bowland clients choose us
- One visit for most repairs
- Fixed prices from your photos
- CHAS and Constructionline accredited
- Same prices wherever you are
Read our pricing and bath cost comparison.
Signs you need bath re-enamelling in Bolton-by-Bowland
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a picture:
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
Questions to ask before booking
- How soon you can use it again
- Whether a trained technician does the job
- The length of the guarantee and what it covers
- What aftercare is recommended
Bolton-by-Bowland: your questions answered
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you cover Bolton-by-Bowland?
Yes. We work across the UK and travel to Bolton-by-Bowland. Send pictures and we will quote, or call 0345 017 0787.
How do I get a price for bath re-enamelling in Bolton-by-Bowland?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Landlords, agents and businesses in Bolton-by-Bowland
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Bolton-by-Bowland, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
Covering Bolton-by-Bowland
Bolton-by-Bowland is about 6 miles north-east of Clitheroe, in Lancashire. Anywhere in BB7, we carry out the work at your property. Bolton-by-Bowland is one of 482 places in Lancashire we cover. Our jobs stretch from Bolton-by-Bowland to Manchester (32 miles away).
All of BB7 is covered, from the main roads to the quietest streets. We regularly work on streets such as Main Street, Hellifield Road and Gisburn Road and the roads around them. We also travel to Holden (1 mile west), Forest Becks (1 mile north), Sawley (2 miles south), Harrop Fold (2 miles west) and Rimington (3 miles south-east). Within a short drive, we also cover Burnley (11 miles south), Accrington (13 miles south), Nelson (9 miles south-east), Colne (8 miles south-east), Clitheroe (6 miles south-west) and Barnoldswick (6 miles east).
What’s near Bolton-by-Bowland
Our customers here include homes close to St Peter and St Paul's Church, The Coach and Horses Public House and Bowland High and the streets around them. Further afield, we also cover the area around Clitheroe Community Hospital (4.1 miles south-west) and Tom Varley Museum of Steam (3.3 miles south-east). Open spaces near Bolton-by-Bowland include Salthill Quarry.
What affects the price in Bolton-by-Bowland
Prices start from £350. You’ll know the full cost before you book. We take into account:
- How much damage there is
- What kind of damage it is
- Previous DIY repairs that have to come out
- Doing more than one item at once
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.
Quotes from your pictures
You can normally get a fixed price without us visiting. To make it quick:
- Any details about the material
- A clear, close picture of the problem area
- Natural light rather than flash
- Something in shot to show the size
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Also near Bolton-by-Bowland
More services for Bolton-by-Bowland
What we do, step by step
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take most of the day, and you can get on with other things while we are there.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Let us know about parking or access
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
Getting a price
If you’re in Bolton-by-Bowland and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Don’t use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Don’t let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
