Lancashire · England

Bath re-enamelling & resurfacing in Sawley, Lancashire

Bath re-enamelling in and around Sawley: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • A dull, rough surface that will not come clean
  • An old resurfacing that’s failing
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Sawley

How we handle bath re-enamelling in Sawley

Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. We work on pressed steel baths, cast iron baths and acrylic baths, and people most frequently call us about chips and rust in more than one place and a coloured bath you want in white.

You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.

Where
Sawley (BB7)
County
Lancashire
Cover
A year, on every repair
Price
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Work for landlords and builders

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.

Sawley and nearby

Sawley is about 4 miles north-east of Clitheroe, in Lancashire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Sawley is one of 482 towns and villages in Lancashire we cover. Our jobs stretch from Sawley to Manchester (about 30 miles away).

Jobs in BB7 are booked in the same way as anywhere else. From Priors Walk, The Paddock and Browgate or a nearby road, we can come to you. If you’re just outside Sawley, we cover Grindleton (1 mile west), Downham (1 mile south-east), Chatburn (1 mile south-west), Holden (2 miles north) and Rimington (2 miles east). Further out, we also cover Burnley (9 miles south-east), Accrington (11 miles south), Nelson (7 miles south-east), Rawtenstall (15 miles south), Colne (8 miles south-east) and Clitheroe (4 miles south-west).

Local landmarks in Sawley

Locally, our jobs take us to homes close to Spread Eagle Hotel, St Ambrose's Church and Bowland High, among other places. The closest station to Sawley is Clitheroe station, roughly 3.4 miles south-west. Well-known places in the area include Clitheroe Community Hospital (2 miles south-west) and Clitheroe Castle (3.5 miles south-west). The countryside around Sawley includes Salthill Quarry and Browsholme Tarn.

Map of Sawley © OpenStreetMap contributors

When to call us in Sawley

Often the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.

It’s worth getting a quote if you see:

  • A coating lifting around the plughole
  • A dull, rough surface that won’t come clean
  • Stains that won’t shift
  • Wear marks under the taps

Comparing quotes

  • Whether the price is fixed and includes VAT
  • If travel is included in the price
  • How the colour is matched
  • Who will actually do the work

How to compare quotes

How to care for the repair

Looking after the surface is easy:

  • Get any chip repaired quickly
  • Keep toiletries on a shelf rather than in the bath
  • Wash away dyes and oils after use
  • A quick wipe after use keeps limescale away

Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.

Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.

Sawley questions

Does re-enamelling smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Can you fix a peeling bath coating?

In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.

Do the materials smell?

Expect a mild smell while we’re working.

Is a repair better than a new one?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

What we do, step by step

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through the curing time and the aftercare.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Preparing for the visit

  • Make sure the room can be ventilated
  • Mention any parking restrictions or tricky access
  • Keep a parking space free if you can

Ask for a price

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Send pictures for a quote

Advice

Honest limits

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Problems we can’t see until an old finish comes off
  • A bath split right through the body
  • Leaks from fittings rather than the bath

Not sure? Send pictures and we will give you a straight answer before booking.

What we work on

  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

What affects the price in Sawley

Prices start from £350. There’s no charge for travel to Sawley. The price comes down to:

  • Unusual colours or finishes
  • How many items we do on one visit
  • How many areas need work
  • What the surface is made of

We charge the same wherever you are, with no extra for Sawley. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed quote

You can typically get a fixed price without us visiting. To help us price it:

  • One picture of the entire bath
  • Daylight if possible, and no flash reflection
  • The postcode, so we can plan the visit
  • Any details about the material

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.