Lancashire · England
Bath Re-enamelling in Bolton Houses
Bath re-enamelling across Bolton Houses and nearby, generally in one visit.
- Resurfacing from £350
- An outdated colour you’d like to change
- Stains that won’t shift
Bath re-enamelling in Bolton Houses without replacing anything
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We’re frequently asked to fix a coloured bath you want in white and stains that won’t shift, in cast iron baths, Victorian roll-tops and acrylic baths.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Where
- Bolton Houses (PR4)
- County
- Lancashire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
Get a quote
Email us photos of the damage and a wider shot of the entire item, and tell us you are in Bolton Houses, and we’ll reply with a fixed quote.
Related advice
What we cannot put right
We won’t take on work that will not last, so here’s what a repair cannot put right:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- Plumbing leaks, which need a plumber
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Do not leave a chip unrepaired
- Never use suction bath mats
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
Dry the bath after use if possible, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Bolton Houses: your questions answered
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you work in Bolton Houses?
Yes. We work across the UK and come to Bolton Houses. Send photos and we will quote, or call 0345 017 0787.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Can you repair several things at once?
Of course, and it usually saves money. Just add the extra items to your pictures and we’ll quote them together.
Do you need bath re-enamelling in Bolton Houses?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Signs it’s time to call us include:
- Stains that will not shift
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
- A dull, rough surface that won’t come clean
Questions to ask before booking
- Aftercare advice
- How long the guarantee is and what it covers
- What happens if they find more damage
- What protection goes down before work starts
Landlords, agents and businesses in Bolton Houses
Landlords, letting agents and housing providers in Bolton Houses use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
If you manage property in Bolton Houses, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Bolton Houses
- Straight answers about what a repair can do
- Free fixed quotes from pictures
- Typically one visit, start to finish
- Colour-matched on site
See our prices page or bath cost comparison.
More services for Bolton Houses
Bolton Houses and the surrounding area
Bolton Houses is about 5 miles west of Fulwood, in Lancashire. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Bolton Houses is one of 482 towns and villages in Lancashire we cover. We work right across the region, from Bolton Houses to Liverpool (about 28 miles away).
We work across the PR4 postcode area and the streets around it. Other places close to Bolton Houses include Moor Side (1 mile west), Wharles (1 mile north), Roseacre (2 miles north), Medlar (2 miles north-west) and Esprick (2 miles north-west). Further out, we also cover Preston (7 miles east), Chorley (14 miles south-east), Lytham St Anne's (7 miles south-west), Bamber Bridge (9 miles south-east), Leyland (10 miles south-east) and Fulwood (5 miles east).
Local landmarks in Bolton Houses
Around Bolton Houses, we work in homes near Treales Church of England Primary School, Eagle and Child pub and Christ Church. Bolton Houses’s nearest station is Salwick station, roughly 1.8 miles south-east of the centre. Further afield, we also cover the area around Royal Preston Hospital (5.7 miles east).
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
