Lancashire · England
Bath Re-enamelling in Medlar
Bath re-enamelling in and around Medlar: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Common questions in Medlar
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
About our bath re-enamelling in Medlar
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We regularly repair cast iron baths, acrylic baths and pressed steel baths, and the jobs we see most are a roll-top that’s seen better days and chips and rust in more than one place.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Location
- Medlar (PR4)
- County
- Lancashire
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Medlar
Other services in Medlar
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- Respect the curing time we give you
- Use washing-up liquid and a soft cloth
- Do not let dyes or oils sit on the finish
- Don’t leave a chip unrepaired
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Prices and what affects them
Prices start from £350. Prices are worked out job by job. The main factors are:
- What the surface is made of
- Doing more than one item at once
- Where the damage is and how we get to it
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
Good photos mean an accurate price. Here’s what we find most useful:
- Any details about the material
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
When a repair is not the answer
We will always be straight with you, so here’s what a repair will not do:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
When to call us in Medlar
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Look out for these signs:
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
Before booking anyone
- How soon you can use it again
- The length of the guarantee and what it covers
- What prep work is covered
- Whether they match the colour on site
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
Landlords, agents and businesses in Medlar
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Our work in Medlar
Medlar is about 5 miles south-east of Poulton-le-Fylde, in Lancashire. Customers in Medlar get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Medlar is one of 482 places in Lancashire where we work. We work right across the region, from Medlar to Liverpool (about 28 miles away).
All of PR4 is within our area. If you’re just outside Medlar, we cover Esprick (1 mile north-west), Roseacre (1 mile north-east), Moor Side (1 mile south-east), Elswick (2 miles north) and Bolton Houses (2 miles south-east). Further out, we also cover Preston (8 miles south-east), Chorley (15 miles south-east), Lytham St Anne's (7 miles south-west), Bamber Bridge (11 miles south-east), Leyland (11 miles south-east) and Fulwood (7 miles east).
Local landmarks in Medlar
For rail, the closest station is Kirkham & Wesham station, about 1.9 miles south. Further afield, we also cover the area around Blackpool Victoria Hospital (5.3 miles west). For a walk, there’s Marton Mere.
About our accreditations · Every repair comes with a one-year guarantee.
