Buckinghamshire · England
Bath re-enamelling & resurfacing in Booker, Buckinghamshire
Bath re-enamelling in and around Booker: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- An old resurfacing that’s failing
Booker questions
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Do you come to Booker?
Yes. We work across the UK and come to Booker and the rest of Buckinghamshire. Send us photos for a fixed quote, or call 0345 017 0787.
Do you cover the entire of Buckinghamshire?
Everywhere in the UK, Booker included. Travel is included in the price.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you resurface freestanding baths?
Yes. Inside and out.
How we handle bath re-enamelling in Booker
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We work on pressed steel baths, acrylic baths and basins & shower trays, and common reasons people contact us are an original cast iron bath that needs restoring and wear marks under the taps.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Booker (HP12, HP11, SL7)
- County
- Buckinghamshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Booker and the surrounding area
Booker is about 2 miles west of High Wycombe, in Buckinghamshire. Wherever you are in the HP12 postcode area, we come to you. Our repair technicians cover 263 places in Buckinghamshire. You can also see our page for London, about 31 miles away.
Postcode districts we cover here: HP12, HP11 and SL7. From Ash Road, New Road and Horns Lane or anywhere nearby, a technician can come to you. Close by, we cover Clayhill (1 mile south-west), High Wycombe (2 miles east), Downley (2 miles north), Terriers (3 miles north-east) and Totteridge (3 miles east). Within a short drive, we also cover Aylesbury (14 miles north), Chesham (10 miles north-east), Marlow (3 miles south), Amersham (9 miles north-east), Beaconsfield (6 miles east) and Chalfont St Peter (10 miles east).
Near you in Booker
Our clients here include homes close to The Squirrel pub, Booker Hill School and Cressex Community School. The closest station to Booker is High Wycombe station, about 2.1 miles east. Well-known places in the area include High Wycombe Castle (1.9 miles north-east) and Eden (1.6 miles north-east). The countryside around Booker includes Gomm's Wood.
- Local facilities include West Wycombe Rural (2.4 miles north-west)
Landlords, agents and businesses in Booker
If you manage property in Booker, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Should you replace it?
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day, with the bath back in use the day after. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
- No extra charge for your area
- Normally one visit, start to finish
Take a look at our prices page or bath cost comparison.
What happens on the day
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. It normally takes most of the day, and we’ll keep you posted as we go.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the following day.
How to prepare
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
Get a quote
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- How easy the damage is to reach
- The colour and finish to match
- The type of damage
- The size and number of damaged areas
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- One picture of the whole bath
- A coin or ruler next to the damage for scale
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Honest limits
Before booking, it’s worth knowing the limits:
- Leaks from fittings rather than the bath
- Holes rusted through the metal
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Nearby places to Booker
Other services in Booker
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Signs you need bath re-enamelling in Booker
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Send us a photo if you notice any of these:
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
- A peeling or bubbling previous coating
- Thin, worn enamel in places
Before you book anyone
- How changes to the job are handled
- If travel is included in the price
- How the colour is matched
- What the guarantee covers, and for how long
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
