Wiltshire · England
Bath re-enamelling & resurfacing in Bottlesford, Wiltshire
Fixed-price bath re-enamelling in Bottlesford and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Landlords, agents and businesses in Bottlesford
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
If you manage property in Bottlesford, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Bath re-enamelling in Bottlesford, done in place
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. We work on cast iron baths, basins & shower trays and Victorian roll-tops, and people most frequently call us about a peeling or bubbling previous coating and stains that won’t shift.
Every job is backed for twelve months in Bottlesford and everywhere else. We return to put right any problem with the work.
- Where
- Bottlesford (SN9)
- Region
- Wiltshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Bottlesford
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Common reasons people in Bottlesford contact us include:
- Several chips and rust patches
- A coloured bath you want in white
- A coating lifting around the plughole
- Wear marks under the taps
What to look for in a quote
- How the room is protected while they work
- If travel is included in the price
- Whether cleaning and preparation are in the price
- What aftercare is recommended
Repair or replace in Bottlesford?
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- Straight answers about what a repair can do
- A fixed quote before booking
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
Take a look at our pricing or resurfacing vs replacement cost guide.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Point us to the nearest place to park
- Let us know which floor the room is on
- Ensure the room can be ventilated
How to get a price
Send us pictures of the damage and a wider shot of the entire item, and tell us you are in Bottlesford, and we’ll come back with a fixed quote.
Read more
How we price bath re-enamelling
Prices start from £350. You won’t pay by the hour. The price is based on:
- The material and finish
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- How many areas need work
Our prices are the same across the UK, so there’s no premium for Bottlesford. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
Before you send photos, these tips help us give you a firm price:
- Something in shot to show the size
- What it’s made of, if you know
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Where we work around Bottlesford
Bottlesford is about 6 miles east of Devizes, in Wiltshire. Anywhere in SN9, a technician comes to you. Our technicians cover 425 places across Wiltshire, from the larger towns to small villages. Our nearest city page is London, about 76 miles away.
Jobs in SN9 are booked in the same way as anywhere else. We regularly work on streets such as Wilsford Road, Gores Lane and Martin's Close and the roads around them. Neighbouring places we cover include Hilcott (1 mile south), Woodborough (1 mile north-east), Beechingstoke (1 mile west), Marden (2 miles south-west) and Charlton St Peter (2 miles south). Further out, we also cover Chippenham (15 miles north-west), Calne (10 miles north-west), Devizes (6 miles west), Melksham (13 miles west), Amesbury (12 miles south) and Marlborough (8 miles north-east).
Around Bottlesford
Around Bottlesford, we work in homes near Church of St Mary Magdalen and Woodborough Church of England Primary School. For rail, the closest station is Pewsey station, roughly 3.4 miles east of the centre. Other landmarks nearby include Pewsey Heritage Centre (3.6 miles east). The countryside around Bottlesford includes Knap Hill.
Honest limits
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Nearby places to Bottlesford
What else we do in Bottlesford
Aftercare tips
So the finish stays in good condition:
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Fix dripping taps quickly
- Keep suction mats out of the bath
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
FAQs for Bottlesford
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Are there extra charges for Bottlesford?
We do not add a call-out fee. The fixed price covers the visit and the work.
Do you work in Bottlesford?
Yes, we do. We send a technician to Bottlesford for every job, and the price is the same as everywhere else.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How much does bath re-enamelling cost in Bottlesford?
Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do the materials smell?
Expect a mild smell while we are working.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
About our accreditations · Every repair comes with a one-year guarantee.
