Staffordshire · England
Bath re-enamelling & resurfacing in Boundary, Staffordshire
Problem with your bath in Boundary? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Wear marks under the taps
About our bath re-enamelling in Boundary
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Our technicians work on Victorian roll-tops, acrylic baths and pressed steel baths, and the jobs we see most are brown or grey marks that don’t clean off and enamel that’s lost its shine and feels rough.
All our work is covered by our one-year guarantee.
- Location
- Boundary (ST10)
- Area hub
- Staffordshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Boundary questions
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
What we are called out for in Boundary
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, generally first under the taps and around the waste.
Most people get in touch after spotting one of these:
- A roll-top that is seen better days
- A coating lifting around the plughole
- Thin, worn enamel in places
- A coloured bath you want in white
Before booking anyone
- Aftercare advice
- How long the guarantee is and what it covers
- What happens if the damage is worse than the pictures show
- When it can be used again
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Landlord and trade work in Boundary
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Prices and what affects them
Resurfacing from £350. There is no area surcharge for Boundary. The price reflects:
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- Access to the area
- The size and number of damaged areas
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what helps:
- Where you are, by postcode
- A clear, close picture of the problem area
- Details of any past repairs
- Any details about the material
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Repair or replace in Boundary?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Boundary clients choose us
- Straight answers about what a repair can do
- No extra charge for your area
- Colour mixed on the day to match
- Dust sheets down, tidy finish
Take a look at our full price list or guide to resurfacing and replacement costs.
Other services in Boundary
About Boundary
Boundary is about 2 miles west of Cheadle, in Staffordshire. From the centre of Boundary to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Boundary is one of 512 towns and villages in Staffordshire we cover. Our nearest city page is Manchester, about 35 miles away.
Postcode districts we cover here: ST10. Whether you live on Delphouse Road, The Common and Little Road or anywhere nearby, we can come to you. We also cover the places around Boundary: Dilhorne (1 mile north-west), Brookhouses (1 mile east), Forsbrook (1 mile south-west), Draycott in the Moors (1 mile south) and Caverswall (2 miles west). We also work in nearby towns such as Stafford (13 miles south), Newcastle-under-Lyme (9 miles west), Longton (4 miles west), Stone (8 miles south-west), Leek (8 miles north) and Biddulph (11 miles north-west).
Landmarks near Boundary
Locally, our jobs take us to homes close to Dilhorne Endowed CE (A) Primary School, Wolstanton Grammar School and Church of All Saints. For rail, the closest station is Blythe Bridge station, roughly 1.9 miles south-west of the centre. Nearby you will also find Cheadle Hospital (1.6 miles east) and Beswick Museum (3.3 miles west). The countryside around Boundary includes Harston Wood.
What happens on the day
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for the best part of a day. Before we go, we’ll explain when it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
