Staffordshire · England
Bath Re-enamelling for Draycott in the Moors homes
Bath re-enamelling for Draycott in the Moors, without a refit. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Several chips and rust patches
- Thin, worn enamel in places
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How we handle bath re-enamelling in Draycott in the Moors
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for a bath in a colour that no longer suits and an original cast iron bath that needs restoring, across Victorian roll-tops, acrylic baths and basins & shower trays.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Draycott in the Moors (ST11)
- County
- Staffordshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Draycott in the Moors
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
Is there a guarantee?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Do the materials smell?
There can be some smell while we work. It clears as the materials cure.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. We charge the same wherever you are, with no extra for Draycott in the Moors. What changes the price is the job itself: the material, the amount of damage and how many items.
Why choose Surface Doctor in Draycott in the Moors
- Same prices wherever you are
- One-year guarantee on every repair
- No need to remove anything
- Colours mixed by hand to suit your surface
See our pricing and bath cost comparison.
What happens on the day
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a full day. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Open a window if you can
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
How to get a price
The quickest way to a price is to send two or three photos through our quote form or call us. We will tell you honestly if a repair is the right fix.
Read more
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
Wipe the bath dry after use where you can, and rinse off any bath products.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
How we price bath re-enamelling
Resurfacing from £350. We price every job individually, from your pictures. The main factors are:
- How much damage there is
- The colour and finish to match
- Whether old repairs or coatings need taking off
- What kind of damage it is
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
How to get a fixed price
We price nearly every job from photos. This is what we need:
- One picture of the entire bath
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Our work in Draycott in the Moors
Draycott in the Moors is about 3 miles south-west of Cheadle, in Staffordshire. Anywhere in ST11, a technician comes to you. Draycott in the Moors is one of 512 places in Staffordshire we cover. We work right across the region, from Draycott in the Moors to Birmingham (34 miles away).
We cover every part of the ST11 postcode area and the streets around it. You will find streets such as Uttoxeter Road, Draycott Old Road and New Avenue, and we cover them all. Close by, we cover Cresswell (1 mile south), Forsbrook (1 mile north-west), Blythe Bridge (1 mile west), Totmonslow (1 mile east) and Saverley Green (1 mile south-west). Larger places within reach include Stafford (11 miles south), Newcastle-under-Lyme (9 miles north-west), Longton (4 miles north-west), Rugeley (15 miles south), Stone (6 miles south-west) and Leek (10 miles north).
Around Draycott in the Moors
Typical jobs here are in homes near The William Amory Primary School, The Izaak Walton pub and Church of St Margaret and the streets around them. The nearest railway station is Blythe Bridge station, about 1.3 miles west of the centre. Nearby you’ll also find Cheadle Hospital (2.5 miles north-east) and Beswick Museum (3 miles west).
Landlords, agents and businesses in Draycott in the Moors
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Nearby places to Draycott in the Moors
What else we do in Draycott in the Moors
About our accreditations · Every repair comes with a one-year guarantee.
