Wiltshire · England
Bath re-enamelling & resurfacing in Box Hill, Wiltshire
Full bath re-enamelling and resurfacing at your home in Box Hill, with a one-year guarantee on every repair.
- Resurfacing from £350
- An outdated colour you’d like to change
- An old resurfacing that is failing
Bath re-enamelling in Box Hill without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Typical jobs include a roll-top that’s seen better days and staining under the taps and around the waste, across Victorian roll-tops, cast iron baths and basins & shower trays.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Box Hill (SN13)
- Region
- Wiltshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Looking after it afterwards
How the surface is treated afterwards matters:
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
- Don’t leave a chip unrepaired
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Places near Box Hill
More services for Box Hill
Signs you need bath re-enamelling in Box Hill
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Clients normally contact us about:
- Wear marks under the taps
- Chips and rust in more than one place
- A roll-top that’s seen better days
- A peeling or bubbling previous coating
Questions to ask before booking
- How long the guarantee is and what it covers
- A fixed price, and whether VAT is included
- What aftercare is recommended
- Whether cleaning and preparation are in the price
Landlords, agents and businesses in Box Hill
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We work for landlords, letting agents and housing providers in Box Hill as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
FAQs for Box Hill
Can you quote from pictures?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Can you repair something that is been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Where we work around Box Hill
Box Hill is about 5 miles south-west of Chippenham, in Wiltshire. We visit homes and businesses in Box Hill and nearby villages, so nothing has to leave your home. We cover 425 places in Wiltshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 74 miles away.
Postcode districts we cover here: SN13. Whether you live on London Road, Maslen Lane and Beech Road or anywhere nearby, a technician can come to you. If you’re just outside Box Hill, we cover Rudloe (1 mile north-east), Box (1 mile south-west), Chapel Plaister (1 mile south), Henley (1 mile south-west) and Wadswick (1 mile south-east). Within a short drive, we also cover Trowbridge (7 miles south), Chippenham (5 miles north-east), Calne (10 miles east), Devizes (12 miles south-east), Westbury (11 miles south) and Melksham (6 miles south-east).
What’s near Box Hill
Around Box Hill, we work in homes near Box Church of England Primary School, The Corsham School and Church of St Thomas A Becket. For rail, the closest station is Melksham station, about 5 miles south-east of the centre. Further afield, we also cover the area around Bath Easton Museum (3.8 miles west) and Chippenham Community Hospital (5.1 miles north-east). Not far away are Vincients Wood.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there’s no premium for Box Hill. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- No extra charge for your area
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
- Dust sheets down, tidy finish
Take a look at our pricing or resurfacing vs replacement cost guide.
How the visit works
You don’t need to empty the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take a full day, and you can get on with other things while we’re there.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Related advice
Honest limits
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
