Wiltshire · England
Bath re-enamelling & resurfacing in Henley, Wiltshire
Local bath re-enamelling for Henley: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- Lots of chips and rust spots
About our bath re-enamelling in Henley
The bath stays where it is, so the taps, tiles and plumbing are not touched. It usually takes one visit, with the bath ready to use the following day. We are frequently asked to fix several chips and rust patches and staining under the taps and around the waste, in pressed steel baths, acrylic baths and basins & shower trays.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Henley (SN13)
- Region
- Wiltshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Henley. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Henley customers choose us
- Everything repaired in place
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
Take a look at our full price list or resurfacing vs replacement cost guide.
Common problems we fix in Henley
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
The things clients usually mention when they call are:
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
- A coloured bath you want in white
Before you book anyone
- What aftercare is recommended
- What happens if the damage is worse than the pictures show
- How soon you can use it again
- What the guarantee covers, and for how long
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Dry the bath after use to stop limescale
- Do not leave bottles, razors or sponges standing on the surface
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
How the visit works
The work is clean and fairly quiet. Protection goes down first, then the job itself takes most of the day. At the end we talk you through the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
What affects the price in Henley
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Where the damage is and how we get to it
- How many areas need work
- The type of damage
- The material
Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
To get a price, send two or three pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Henley questions
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
How do I get a price for bath re-enamelling in Henley?
Prices start from £350. Every job gets a fixed price based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Also in Henley
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Henley as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Where we work around Henley
Henley is about 5 miles east of Bath, in Wiltshire. Jobs in Henley are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We work in all 425 towns and villages in Wiltshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 75 miles away.
We cover every part of the SN13 postcode area and the streets around it. If you are just outside Henley, we cover Box (1 mile north), Kingsdown (1 mile south-west), Ashley (1 mile north-west), Chapel Plaister (1 mile east) and Wadswick (1 mile east). Further out, we also cover Trowbridge (6 miles south), Chippenham (6 miles north-east), Calne (11 miles east), Devizes (12 miles east), Westbury (11 miles south) and Melksham (6 miles south-east).
Landmarks near Henley
Locally, our jobs take us to homes close to Church of St Thomas A Becket, Box Primary School and Box Church of England Primary School and the streets around them. The nearest railway station is Bradford-On-Avon station, about 4.4 miles south of the centre. Further afield, we also cover the area around Corsham (3.5 miles north-east) and Melksham Community Hospital (5.9 miles south-east).
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
