Kent · England
Bath re-enamelling & resurfacing in Boyden Gate, Kent
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Boyden Gate. Send pictures for a free, fixed quote.
- Resurfacing from £350
- An outdated colour you’d like to change
- A coating lifting around the plughole
How we handle bath re-enamelling in Boyden Gate
The bath stays where it is, so your taps, tiles and plumbing are left alone. It usually takes one visit, and can be used again the following day. We work on acrylic baths, cast iron baths and Victorian roll-tops, and common reasons people get in touch are brown or grey marks that don’t clean off and worn patches where water runs and sits.
Every repair comes with our one-year guarantee, wherever you are in Kent.
- Location
- Boyden Gate (CT3)
- Region
- Kent
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
What affects the price in Boyden Gate
Resurfacing from £350. There’s no area surcharge for Boyden Gate. The price reflects:
- How many items we do on one visit
- What kind of damage it is
- Any earlier repairs that need removing first
- How many areas need work
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
Phone photos are fine. Just make sure we can see:
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- Details of any past repairs
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why Boyden Gate customers choose us
- Typically one visit, start to finish
- Work done at your home or business
- A fixed quote before booking
- Rooms protected and left tidy
Take a look at our full price list or guide to resurfacing and replacement costs.
Also in Boyden Gate
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to the best part of a day, tidy-up included.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Point us to the nearest place to park
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
How to get a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
When to call us in Boyden Gate
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
You may need us if you’ve spotted:
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- Several chips and rust patches
- A peeling or bubbling previous coating
Before booking anyone
- When it can be used again
- What aftercare is recommended
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Questions from Boyden Gate
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Our work in Boyden Gate
Boyden Gate is about 3 miles south-east of Herne Bay, in Kent. Customers in Boyden Gate get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. We cover all 922 towns and villages across Kent, from the larger towns to small villages. Our nearest city page is London, about 56 miles away.
Our repair technicians cover all of the CT3 postcode area and the streets around it. Whether you live on Forge Lane and Church Lane or anywhere nearby, a technician can come to you. We also cover the places around Boyden Gate: Chislet (1 mile south), Highstead (1 mile north-west), Chitty (1 mile south-east), Hollow Street (1 mile south) and Old Tree (1 mile south-west). Larger places within reach include Canterbury (7 miles south-west), Margate (9 miles east), Dover (15 miles south), Ramsgate (10 miles east), Broadstairs (10 miles east) and Whitstable (7 miles west).
Local landmarks in Boyden Gate
Our customers here include homes close to Chislet Church of England Primary School, Church of St Mary the Virgin and Grove Ferry Picnic Area. The closest station to Boyden Gate is Herne Bay station, roughly 3.4 miles west of the centre. Other landmarks nearby include St Martins Hospital (6 miles south-west). The countryside around Boyden Gate includes West Blean and Thornden Woods.
Honest limits
A repair is not right for every job, including:
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
