Wiltshire · England
Bath re-enamelling & resurfacing in Bradford Leigh, Wiltshire
Bath re-enamelling across Bradford Leigh and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- Chips and rust in more than one place
Bath re-enamelling at your home in Bradford Leigh
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. There is no removal, plumbing or tiling involved. We are often asked to fix an original cast iron bath that needs restoring and wear marks under the taps, in cast iron baths, pressed steel baths and acrylic baths.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Bradford Leigh (BA15)
- Region
- Wiltshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
We turn up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Have a window or extractor fan available
- Keep a parking space free if you can
- Make sure the area is dry
Ask for a price
Most customers in Bradford Leigh get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Also near Bradford Leigh
Also in Bradford Leigh
When to call us in Bradford Leigh
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Common reasons people in Bradford Leigh contact us include:
- Thin, worn enamel in places
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Before you book anyone
- When it can be used again
- Whether the price covers travel
- How the room is protected while they work
- What happens if they find more damage
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- The material and finish
- Whether we combine several jobs
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- What it’s made of, if you know
- A clear, close picture of the problem area
- Where you are, by postcode
- Any earlier repairs or coatings
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Landlord and trade work in Bradford Leigh
If you manage property in Bradford Leigh, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.
Our work in Bradford Leigh
Bradford Leigh is about 3 miles north-west of Trowbridge, in Wiltshire. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. We cover 425 places in Wiltshire. You can also see our page for Birmingham, about 78 miles away.
We work across the BA15 postcode area. We also cover the places around Bradford Leigh: Bradford-on-Avon (1 mile south-west), Lower Wraxall (1 mile north), Little Ashley (1 mile west), South Wraxall (2 miles north) and Staverton (2 miles south-east). Larger places within reach include Trowbridge (3 miles south-east), Chippenham (8 miles north-east), Calne (12 miles north-east), Devizes (11 miles east), Westbury (7 miles south) and Melksham (5 miles east).
Local landmarks in Bradford Leigh
Locally, our jobs take us to homes close to The Old Ride School, St Laurence School and Christ Church Church of England Controlled Primary School and the streets around them. Also close by are 13 Whitehill pub (0.9 miles south-west) and Christ Church (0.8 miles south-west). The closest station to Bradford Leigh is Bradford-On-Avon station, roughly 1.2 miles south-west. A little further out are The Shires Shopping Centre (3 miles south-east) and Trowbridge Castle (3.1 miles south-east).
- Other local spots include Bradford Without (1.1 miles south-east)
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why choose Surface Doctor in Bradford Leigh
- Straight answers about what a repair can do
- Rooms protected and left tidy
- One visit for most repairs
- No need to remove anything
Read our pricing and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Bradford Leigh: your questions answered
What happens next?
We review the photos and send a fixed quote with dates.
Do you cover the entire of Wiltshire?
Everywhere in the UK, Bradford Leigh included. Travel is included in the price.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
What we can’t put right
To be straight with you, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
