Nottingham · England
Bath Re-enamelling in Wollaton
We travel to Wollaton for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- How easy the damage is to reach
The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.
Send pictures for a quote
Two or three clear photos are generally enough. It helps if you send:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Bath re-enamelling in Wollaton without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. If you are dealing with brown or grey marks that don’t clean off and an old resurfacing that’s failing, we can usually put it right.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Wollaton (NG8, NG9)
- Area hub
- Nottingham
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
Wollaton questions
How much does bath re-enamelling cost in Wollaton?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Do you cover the entire of Nottingham?
All of Nottingham, and the rest of the UK. There is no extra charge for travel.
How long does re-enamelling take?
One day for most baths, ready the following day. We give you timings with the quote.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before and we will plan for it.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
What we cannot put right
In fairness, some problems need a different fix:
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Store bottles off the bath
- Dry the bath after use to stop limescale
- Don’t leave a chip unrepaired
- Repair dripping taps early
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What we are called out for in Wollaton
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
The most common problems we are called about are:
- An old resurfacing that is failing
- A dull, rough surface that won’t come clean
- A roll-top that is seen better days
- Wear marks under the taps
Before you book anyone
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- How the room is protected while they work
- How the colour is matched
Covering Wollaton
Wollaton is about 2 miles north of Beeston, in Nottingham. Customers in Wollaton get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We cover 51 places in Nottingham. Our jobs stretch from Wollaton to Birmingham (about 43 miles away).
All of NG8 and NG9 is within our area. Streets in the area include Kevin Road, May Avenue and Bridge Road, and we cover them all. Other places close to Wollaton include Trowell Moor (1 mile north-west), Bramcote Hills (1 mile south), Bramcote (1 mile south-west), Lenton Abbey (1 mile south-east) and Beechdale (2 miles north-east). Larger places within reach include Nottingham (3 miles north-east), Arnold (6 miles north-east), Bulwell (4 miles north-east), Sneinton (4 miles east), St Ann's (4 miles east) and Clifton (4 miles south-east).
Landmarks near Wollaton
We visit homes around Fernwood Primary School, Hemlock Stone pub and Fernwood School, among other places. The closest station to Wollaton is Beeston station, roughly 2.3 miles south-east. Nearby you’ll also find Queen's Medical Centre (2.1 miles east) and intu Broadmarsh (3.6 miles east). Not far away are Attenborough Nature Reserve and Wilford Hill.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Towns and villages near Wollaton
More services for Wollaton
The process
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Let the surface dry out before the visit
Get a quote
To get a price, send two or three photos through our quote form or call us. We will say straight away if a repair is the right fix.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
