Worcestershire · England
Bath Re-enamelling in Bransford
Damaged bath in Bransford? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- A bath that stays dull however much you clean it
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- One picture of the entire bath
- Any details about the material
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Bath re-enamelling in Bransford without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. We’re frequently asked to fix several chips and rust patches and a period or roll-top bath worth keeping, on pressed steel baths, basins & shower trays and cast iron baths.
We stand behind the work with a one-year guarantee.
- Location
- Bransford (WR6)
- Region
- Worcestershire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Bransford questions
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
How much does bath re-enamelling cost in Bransford?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Do you resurface freestanding baths?
Yes. Inside and out.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Covering Bransford
Bransford is about 4 miles north of Great Malvern, in Worcestershire. Wherever you are in the WR6 postcode area, we come to you. Bransford is one of 376 places in Worcestershire we cover. You can also see our page for Birmingham, about 27 miles away.
Our visits in WR6 work the same way as everywhere else we cover. Streets in the area include Orchard Way, Suckley Road and Bensfield, all of which we cover. We also cover the places around Bransford: Leigh (1 mile north-west), Leigh Sinton (1 mile south-west), Brockamin (1 mile north-west), Broadwas (2 miles north-west) and Halfkey (3 miles south-west). We also work in nearby towns such as Worcester (4 miles north-east), Kidderminster (15 miles north), Bromsgrove (15 miles north-east), Great Malvern (4 miles south), Droitwich Spa (9 miles north-east) and Stourport-on-Severn (12 miles north).
What’s near Bransford
Around Bransford, we work in homes near Leigh and Bransford Primary School, Worcester Bank House Hotel Spa & Golf; BW Premier Collection and Church of St Eadburga and the streets around them. The closest station to Bransford is Malvern Link station, about 3.2 miles south. Well-known places in the area include Worcester Castle (3.8 miles east) and Powick Hospital (2.2 miles south-east). The countryside around Bransford includes End Hill.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Towns and villages near Bransford
Other services in Bransford
Landlords, agents and businesses in Bransford
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
What a repair can’t fix
We will always be straight with you, so here’s what a repair cannot fix:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Bransford
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
When to call us in Bransford
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Customers generally contact us about:
- Enamel that is lost its shine and feels rough
- A coloured bath you want in white
- A peeling or bubbling previous coating
- Brown or grey marks that don’t clean off
Questions to ask before you book
- What prep work is covered
- Whether the colour is mixed to match
- Aftercare advice
- What the guarantee covers, and for how long
Repair or replace in Bransford?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why Bransford clients choose us
- Honest advice, even when it means no job
- Colour-matched on site
- One price list for the whole UK
- Fixed prices from your photos
See our full price list and bath cost comparison.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take a full day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
How to prepare
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
Ask for a price
Upload photos of the damage and a wider shot of the whole item, and tell us you are in Bransford, and we’ll reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
