Worcestershire · England
Bath re-enamelling & resurfacing in Leigh, Worcestershire
Bath re-enamelling in Leigh without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
Questions from Leigh
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Worcestershire.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
What happens next?
We come back with a fixed price, plus dates. You’re under no obligation.
Do you cover Leigh?
Yes. We cover the whole UK and come to Leigh. Send pictures and we’ll quote, or call 0345 017 0787.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Bath re-enamelling in Leigh without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We regularly repair pressed steel baths, cast iron baths and acrylic baths, and common reasons people contact us are thin, worn enamel in places and lots of chips and rust spots.
We stand behind the work with a one-year guarantee.
- Where
- Leigh (WR6)
- Area hub
- Worcestershire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
When to call us in Leigh
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is normally perfectly sound.
If you can see any of these, send us a picture:
- Several chips and rust patches
- A roll-top that’s seen better days
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
What to look for in a quote
- Whether a trained technician does the job
- How long the guarantee is and what it covers
- How the colour is matched
- What prep work is covered
Where we work around Leigh
Leigh is about 4 miles north of Great Malvern, in Worcestershire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Leigh is one of 376 towns and villages in Worcestershire we cover. You can also see our page for Birmingham, about 27 miles away.
Here we cover the WR6 postcode area. Close by, we cover Brockamin (1 mile west), Bransford (1 mile south-east), Broadwas (1 mile north-west), Alfrick (2 miles west) and Leigh Sinton (2 miles south). Larger places within reach include Worcester (5 miles east), Kidderminster (15 miles north), Bromsgrove (15 miles north-east), Great Malvern (4 miles south), Droitwich Spa (9 miles north-east) and Stourport-on-Severn (11 miles north).
Landmarks near Leigh
We visit homes around Church of St Eadburga. Leigh’s nearest station is Malvern Link station, about 3.7 miles south of the centre. Nearby you will also find Cop Castle (4.3 miles west) and Powick Hospital (3.2 miles south-east). Open spaces near Leigh include Ankerdine Hill.
How it works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a full day. We clean up when we are done and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Repair or replace in Leigh?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- A year’s guarantee on all work
- Dust sheets down, tidy finish
- Generally one visit, start to finish
- Work done at your home or business
Take a look at our full price list or guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
What affects the price in Leigh
Resurfacing from £350. You will not pay by the hour. The price depends on:
- How many areas need work
- Where the damage is and how we get to it
- Whether we combine several jobs
- Previous DIY repairs that have to come out
Our prices are the same across the UK, so there’s no premium for Leigh. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
Two or three clear pictures are normally enough. Try to include:
- Any details about the material
- Details of any past repairs
- One sharp close-up of the damage
- The postcode, so we can plan the visit
The quickest way to a price is to send two or three photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Landlords, agents and businesses in Leigh
If you manage property in Leigh, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Towns and villages near Leigh
Other services in Leigh
About our accreditations · Every repair comes with a one-year guarantee.
