Somerset · England
Bath re-enamelling & resurfacing in Brean, Somerset
Bath re-enamelling in Brean without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Stains that won’t shift
- A coloured bath you want in white
Brean and the surrounding area
Brean is about 4 miles north of Burnham-on-Sea, in Somerset. We travel to clients in Brean and the surrounding area, so nothing has to leave your home. Brean is one of 640 towns and villages in Somerset where we work.
Our repair technicians cover all of the TA8 postcode area and the streets around it. You’ll find streets such as Pinewood Way, South Road and Hill View. We also travel to Berrow (2 miles south), Batch (2 miles east), Purn (2 miles north-east), Uphill (3 miles north-east) and Lympsham (3 miles east). Larger places within reach include Bridgwater (11 miles south), Burnham-on-Sea (4 miles south), Cheddar (10 miles east), Sydenham (12 miles south), Highbridge (5 miles south) and North Petherton (14 miles south).
Local landmarks in Brean
We visit homes around Seagull Inn and Church of St Bridget and the streets around them. The nearest railway station is Weston-Super-Mare station, roughly 3.9 miles north-east of the centre. Further afield, we also cover the area around Yielding Tree Railway Museum (2.4 miles north-east) and Weston General Hospital (2.6 miles north-east). Not far away are Brean Down.
About our bath re-enamelling in Brean
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a peeling or bubbling previous coating and brown or grey marks that don’t clean off, on cast iron baths, acrylic baths and pressed steel baths.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Brean (TA8)
- Area hub
- Somerset
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Brean
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
People normally call us when they notice something like this:
- An outdated colour you’d like to change
- Thin, worn enamel in places
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
Comparing quotes
- How soon you can use it again
- Whether the price covers travel
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
More services for Brean
How to care for the repair
Once the work has cured, treat it gently:
- Keep suction mats out of the bath
- Don’t let dyes or oils sit on the finish
- Don’t use the bath until it has fully cured
- A quick wipe after use keeps limescale away
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
Take a look at our full price list and resurfacing vs replacement cost guide.
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
Send us photos and we will tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
What bath re-enamelling costs
Prices start from £350. There’s no area surcharge for Brean. The price reflects:
- Where the damage is and how we get to it
- Whether we combine several jobs
- The material
- The colour and finish to match
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your photos
You can usually get a fixed quote without us visiting. To make it quick:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Details of any past repairs
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Questions from Brean
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do you come to Brean?
Yes, we do. Repair technicians travel to Brean from across the region, with no extra charge for travel.
How much does bath re-enamelling cost in Brean?
Prices start from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do the materials smell?
There may be a mild smell during the work.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Ensure the area is dry
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say right away if a repair is the right fix.
Read more
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
