Staffordshire · England
Bath Re-enamelling for Brereton homes
Full bath re-enamelling and resurfacing in Brereton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
FAQs for Brereton
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
How much does bath re-enamelling cost in Brereton?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.
What happens next?
We review the pictures and send a fixed quote.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Can a failed resurfacing be redone?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Bath re-enamelling at your home in Brereton
We don’t move the bath, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. We regularly repair Victorian roll-tops, cast iron baths and pressed steel baths, and the jobs we see most are a bath that stays dull however much you clean it and an original cast iron bath that needs restoring.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Brereton (WS15)
- Area hub
- Staffordshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What we do, step by step
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a full day from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the following day.
Getting ready for the visit
- Clear the area around the damage
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Read more
Covering Brereton
Brereton is about 1 mile south-east of Rugeley, in Staffordshire. Customers in Brereton get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We work in 512 places across Staffordshire. Our nearest city page is Birmingham, about 19 miles away.
Here we cover the WS15 postcode area. Local streets include Gorse Road, Larch Road and Lodge Road, and we cover them all. Other places close to Brereton include Breretonhill (1 mile south-east), Rugeley (1 mile north-west), Brereton Cross (1 mile south-east), Upper Longdon (1 mile south-east) and Slitting Mill (2 miles west). We also work in nearby towns such as Stafford (9 miles north-west), Burton upon Trent (13 miles east), Tamworth (13 miles south-east), Cannock (5 miles south-west), Lichfield (6 miles south-east) and Burntwood (5 miles south).
Around Brereton
Locally, our jobs take us to homes close to Hagley Park Academy, Redbrook Hayes Community Primary School and Brereton Methodist Church and the streets around them. Nearby too are The Hart School (1.5 miles north-west) and The Talbot Inn (less than half a mile south-east). Brereton’s nearest station is Rugeley Town station, about 0.9 miles north-west of the centre. A little further out are Cannock Castle Ring (2.3 miles south) and St Matthew's Hospital (4.5 miles south). Green spaces nearby include George's Hayes.
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Brereton clients choose us
- Straight answers about what a repair can do
- Work done at your home or business
- One-year guarantee on every repair
- No need to remove anything
Read our pricing and resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Brereton
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
People generally call us after spotting one of these:
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- A peeling or bubbling previous coating
- Thin, worn enamel in places
What your quote should include
- Who will actually do the work
- Whether the colour is mixed to match
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Honest limits
We will always be straight with you, so here’s what a repair can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- A bath that’s rusted through
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Brereton
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Places near Brereton
What else we do in Brereton
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
- Do not leave a chip unrepaired
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
