Staffordshire · England
Bath re-enamelling & resurfacing in Etchinghill, Staffordshire
Full bath re-enamelling and resurfacing at your home in Etchinghill, with a one-year guarantee on every repair.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Several chips and rust patches
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How we handle bath re-enamelling in Etchinghill
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Whether it’s an outdated colour you’d like to change and several chips and rust patches, we can help, whatever the material.
Whatever the size of the job, you get the same one-year guarantee in Etchinghill and across Staffordshire.
- Location
- Etchinghill (WS15, ST17)
- County
- Staffordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a full day. If we find something your pictures didn’t show, we will explain it before carrying on.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let us know if it has been repaired before
- Have a window or extractor fan available
- Keep a parking space free if you can
Ask for a price
To get a price, send two or three pictures through our quote form or ring us. We will say right away whether it can be repaired.
Advice
Keeping it looking good
Once the work has cured, treat it gently:
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
- Rinse off hair dye, oils and bath bombs straight away
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Common problems we fix in Etchinghill
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Common reasons people in Etchinghill contact us are:
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
- Stains that will not shift
- An outdated colour you’d like to change
What to look for in a quote
- A fixed quote, and whether VAT is included
- Whether they match the colour on site
- What prep work is covered
- Whether a trained technician does the job
More services for Etchinghill
When a repair is not the answer
We will always be straight with you, so here’s what a repair cannot fix:
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
Send us photos and we will tell you honestly.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Common questions in Etchinghill
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
Do you work in Etchinghill?
We do. We send a technician to Etchinghill for every job, and the price is the same as everywhere else.
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we will ask for another angle.
How long does re-enamelling take?
One day for most baths, ready the next day. We give you timings with the quote.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Repairing versus replacing in Etchinghill
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your photos
- One visit for most repairs
- One price list for the whole UK
See our pricing and guide to resurfacing and replacement costs.
Work for landlords and builders
If you manage property in Etchinghill, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.
We work for landlords, letting agents and housing providers in Etchinghill as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Our work in Etchinghill
Etchinghill is about 1 mile north-west of Rugeley, in Staffordshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We cover all 512 towns and villages in Staffordshire. Our nearest city page is Birmingham, about 21 miles away.
Jobs in WS15 and ST17 are booked in the same way as anywhere else. Jobs here include addresses on Pump Lane, Mount Road and Bower Lane. Neighbouring places we cover include Slitting Mill (1 mile south), Rugeley (1 mile south-east), Bishton (1 mile north), Colwich (2 miles north-west) and Colton (2 miles north-east). Within a short drive, we also cover Stafford (7 miles north-west), Burton upon Trent (14 miles east), Tamworth (15 miles south-east), Cannock (5 miles south-west), Lichfield (8 miles south-east) and Burntwood (6 miles south).
Landmarks near Etchinghill
Typical jobs here are in homes near Fair Oak Academy, The John Bamford Primary School and The Hart School and the streets around them. For rail, the closest station is Rugeley Town station, roughly 1.2 miles south-east of the centre. Further afield, we also cover the area around Cannock Castle Ring (3.6 miles south) and Museum of Childhood And Costume (3.5 miles north). Not far away are Tixall Wide and Wolseley Centre.
About our accreditations · Every repair comes with a one-year guarantee.
