Staffordshire · England
Bath re-enamelling & resurfacing in Slitting Mill, Staffordshire
Bath re-enamelling in Slitting Mill without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Wear marks under the taps
- A peeling or bubbling previous coating
Bath re-enamelling in Slitting Mill, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s lots of chips and rust spots and a period or roll-top bath worth keeping, we can help.
A one-year guarantee comes as standard.
- Area
- Slitting Mill (WS15)
- County
- Staffordshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Slitting Mill
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Slitting Mill use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
About Slitting Mill
Slitting Mill is about 1 mile west of Rugeley, in Staffordshire. Whether you’re in the middle of Slitting Mill or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 512 towns and villages across Staffordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 20 miles away.
Every address in WS15 is within our area, from the main roads to the quietest streets. From Oakley Copse, Slitting Mill Road and Post Office Lane or anywhere nearby, a technician can come to you. Nearby, we also work in Etchinghill (1 mile north), Rugeley (1 mile east), Brereton (2 miles east), Bishton (2 miles north) and Breretonhill (2 miles south-east). Further out, we also cover Stafford (8 miles north-west), Burton upon Trent (14 miles east), Tamworth (15 miles south-east), Cannock (5 miles south-west), Lichfield (7 miles south-east) and Burntwood (5 miles south).
Around Slitting Mill
We visit homes around The John Bamford Primary School, St John the Baptist and Fair Oak Academy and the streets around them. For rail, the closest station is Rugeley Town station, about 0.9 miles east. A little further out are Cannock Chase Hospital (5.2 miles south-west) and Cannock Castle Ring (3 miles south). Open spaces near Slitting Mill include Tixall Wide and Wolseley Centre.
What we cannot put right
To be straight with you, some problems need a different fix:
- A cast iron or steel bath that is cracked right through
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Repair or replace in Slitting Mill?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why us?
- One price list for the entire UK
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
See our prices page or resurfacing vs replacement cost guide.
Do you need bath re-enamelling in Slitting Mill?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Signs it’s time to call us include:
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Questions to ask before booking
- Whether the price is fixed and includes VAT
- How your room will be protected
- How long it needs to cure
- What happens if the damage is worse than the pictures show
Nearby places to Slitting Mill
Also in Slitting Mill
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Allow most of the day from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the next day.
Before we arrive
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
Getting a price
Most clients in Slitting Mill get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Common questions in Slitting Mill
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
How much does bath re-enamelling cost in Slitting Mill?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the whole item with your WS15 postcode.
How long will the bath be out of use?
Typically one day, with the bath ready the following day. A badly pitted bath can need a second day.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Do you cover Slitting Mill?
Yes. We cover the entire UK and come to Slitting Mill and the rest of Staffordshire. Send pictures and we’ll quote, or call 0345 017 0787.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Slitting Mill. The price comes down to:
- The material
- How many areas need work
- The type of damage
- Whether old repairs or coatings need taking off
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed price
When you take your pictures, a few simple things make all the difference:
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Where you are, by postcode
- Any details about the material
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
