Warwickshire · England
Bath Re-enamelling in Bretford
Bath re-enamelling across Bretford and nearby, typically in one visit.
- Resurfacing from £350
- A roll-top that is seen better days
- Worn patches where water runs and sits
About our bath re-enamelling in Bretford
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the day after. Whether it’s stains that won’t shift and an original cast iron bath that needs restoring, we can typically put it right, on cast iron baths, Victorian roll-tops and acrylic baths alike.
Big or small, you get the same one-year guarantee in Bretford and across Warwickshire.
- Where
- Bretford (CV23)
- County
- Warwickshire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. There’s no charge for travel to Bretford. The price depends on:
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- What the surface is made of
- How much damage there is
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- A picture taken from further back
- Any details about the material
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say straight away if a repair is the right fix.
When to call us in Bretford
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
The things clients generally mention when they call are:
- An old resurfacing that is failing
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
What your quote should include
- How long the guarantee is and what it covers
- How to care for the finish
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the pictures show
Landlord and trade work in Bretford
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Bretford, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
Questions from Bretford
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Covering Bretford
Bretford is about 5 miles west of Rugby, in Warwickshire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We cover all 324 towns and villages in Warwickshire, from the larger towns to small villages. We work right across the region, from Bretford to Birmingham (23 miles away).
Jobs in CV23 are booked in the same way as anywhere else. We regularly work on streets such as Queens Road, Kings Newnham Lane and Brandon Road. Close by, we cover Church Lawford (1 mile south-east), King's Newnham (1 mile east), Wolston (2 miles south-west), Little Lawford (2 miles east) and Dunsmore Heath (3 miles south). Within a short drive, we also cover Rugby (5 miles east), Nuneaton (10 miles north-west), Warwick (12 miles south-west), Royal Leamington Spa (10 miles south-west), Bedworth (8 miles north-west) and Leamington Spa (10 miles south-west).
What’s near Bretford
Nearby you will also find University Hospital Coventry (3.6 miles north-west) and H M Prison Service Museum (2.7 miles north-east). The countryside around Bretford includes Brandon Marsh.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
What a repair cannot fix
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- A cast iron or steel bath that is cracked right through
- Leaking taps or wastes (a plumber’s job)
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we will say what we think.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Repair or replace in Bretford?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the whole surface without moving it. Prices start from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Bretford customers choose us
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- A fixed quote before booking
- Colour mixed on the day to match
See our full price list and bath cost comparison.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a full day. If we find something your photos didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
- Clear the area around the damage
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
Related advice
Other services in Bretford
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
