Warwickshire · England
Bath Re-enamelling in Wolston
We travel to Wolston for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coloured bath you want in white
- Brown or grey marks that don’t clean off
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
About our bath re-enamelling in Wolston
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. Typical jobs include an old resurfacing that’s failing and several chips and rust patches, across basins & shower trays, cast iron baths and acrylic baths.
Whatever the size of the job, you get the same one-year guarantee in Wolston and across Warwickshire.
- Where
- Wolston (CV8)
- Region
- Warwickshire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Wolston
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Common reasons people in Wolston contact us are:
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
Questions to ask before booking
- How long it needs to cure
- How to care for the finish
- How long the guarantee is and what it covers
- Is the price fixed, and does it include VAT?
Towns and villages near Wolston
More services for Wolston
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, generally one day. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Wolston clients choose us
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Nothing taken out or refitted
Read our prices page or guide to resurfacing and replacement costs.
About Wolston
Wolston is about 5 miles south-east of Coventry, in Warwickshire. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Wolston is one of 324 towns and villages in Warwickshire we cover. Our jobs stretch from Wolston to Birmingham (about 22 miles away).
Our technicians cover all of the CV8 postcode area. From Main Street, Paddocks Close and Elmdene Close or a nearby road, we can come to you. If you’re just outside Wolston, we cover Bretford (2 miles north-east), Dunsmore Heath (2 miles south-east), Church Lawford (2 miles east), King's Newnham (3 miles east) and Lawford Heath (3 miles south-east). Further out, we also cover Rugby (6 miles east), Nuneaton (11 miles north), Warwick (10 miles south-west), Royal Leamington Spa (8 miles south-west), Bedworth (8 miles north-west) and Leamington Spa (8 miles south-west).
Near you in Wolston
We visit homes around Church of St Margaret and Wolston St Margaret's CofE Primary School and the streets around them. Nearby you’ll also find Aircraft Radio Museum (3.4 miles west) and University Hospital Coventry (3.5 miles north-west). The countryside around Wolston includes Brandon Marsh.
How to care for the repair
Once the work has cured, treat it gently:
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
- A quick wipe after use keeps limescale away
- Rinse off hair dye, oils and bath bombs immediately
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Wolston: your questions answered
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
How long will the bath be out of use?
Most baths are done in a day, ready the following day. We give you timings with the quote.
What affects the price in Wolston
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- How many items we do on one visit
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
When you take your photos, these tips help us give you a firm price:
- One picture of the whole bath
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Details of any past repairs
For a price in Wolston, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
What we cannot put right
A repair is not always the answer, and we would rather say so up front. We can’t fix:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we will tell you honestly.
Materials we work on in Wolston
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which usually takes a full day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Let us know which floor the room is on
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
