Falkirk · Scotland
Bath re-enamelling & resurfacing in Brightons, Falkirk
Our repair technicians come to Brightons for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- Lots of chips and rust spots
When to call us in Brightons
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Signs it’s time to call us include:
- An old resurfacing that is failing
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
What your quote should include
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
- How the room is protected while they work
- Whether the price covers travel
Bath re-enamelling in Brightons, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. There’s no removal, plumbing or tiling involved. If you are dealing with an old resurfacing that’s failing and several chips and rust patches, we can help, on Victorian roll-tops, pressed steel baths and acrylic baths alike.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Brightons (FK2)
- Area hub
- Falkirk
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Brightons: your questions answered
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Do you work in Brightons?
Yes, we do. We send a technician to Brightons for every job, and the price is the same as everywhere else.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Where we work around Brightons
Brightons is about 2 miles south of Grangemouth, in Falkirk. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Brightons is one of 50 towns and villages in Falkirk we cover. Our nearest city page is Edinburgh, about 20 miles away.
Our visits in FK2 work the same way as everywhere else we cover. From Main Street, Park Terrace and Charlotte Street or a nearby road, we can come to you. With the B805 close by, Brightons is easy for our repair technicians to reach. Neighbouring places we cover include Rumford (1 mile south-east), Wallacestone (1 mile west), Polmont (1 mile north-east), Reddingmuirhead (1 mile west) and Maddiston (1 mile south-east). Further out, we also cover Falkirk (3 miles north-west), Bo'ness (5 miles north-east), Larbert (5 miles north-west), Stenhousemuir (5 miles north-west), Denny (8 miles west) and Bonnybridge (7 miles west).
Local landmarks in Brightons
Typical jobs here are in homes near Brightons Parish Church and Graeme High School. Brightons has its own railway station: Polmont station. A little further out are Falkirk Community Hospital (3 miles north-west) and Grangemouth Museum (2 miles north). Open spaces near Brightons include Cockleroy and Callendar Lake.
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we take into account:
- Any earlier repairs that need removing first
- What the surface is made of
- How many areas need work
- The colour and finish to match
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Something in shot to show the size
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Aftercare tips
To keep it looking its best for years:
- Get any chip repaired quickly
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
- Don’t use the bath until it has fully cured
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Towns and villages near Brightons
Also in Brightons
When a repair isn’t the answer
It helps to know what we cannot do too:
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why Brightons clients choose us
- One price list for the entire UK
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
- One visit for most repairs
See our pricing or resurfacing vs replacement cost guide.
Landlords, agents and businesses in Brightons
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
The process
We agree an arrival time beforehand, so you’re not left guessing. Once we are there, the work takes the best part of a day. We leave the room clean and ready to use once it has cured.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the next day.
How to prepare
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
Getting a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Advice
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
