Falkirk · Scotland
Bath re-enamelling & resurfacing in Wallacestone, Falkirk
Bath re-enamelling for Wallacestone, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A roll-top that’s seen better days
- An old resurfacing that’s failing
About our bath re-enamelling in Wallacestone
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. Typical jobs include a bath that stays dull however much you clean it and thin, worn enamel in places, in cast iron baths, basins & shower trays and Victorian roll-tops.
Big or small, it’s backed by a one-year guarantee.
- Where
- Wallacestone (FK2)
- Area hub
- Falkirk
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we cannot put right
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Places near Wallacestone
Also in Wallacestone
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Wallacestone. The price depends on:
- Doing more than one item at once
- How hard the colour is to match
- How easy the damage is to reach
- The material
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- What it’s made of, if you know
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Should you replace it?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Wallacestone
- Colours mixed by hand to suit your surface
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
- We leave the room as we found it
Read our pricing or bath cost comparison.
How it works
You do not need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. Most jobs take a full day, and you can get on with other things while we are there.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Ensure the area is dry
- Keep children and pets away from the room on the day
Getting a price
Most customers in Wallacestone get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
Landlords, agents and businesses in Wallacestone
We work for landlords, letting agents and housing providers in Wallacestone as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
If you manage property in Wallacestone, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Our work in Wallacestone
Wallacestone is about 2 miles south of Grangemouth, in Falkirk. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover all 50 towns and villages across Falkirk, from the larger towns to small villages. Our jobs stretch from Wallacestone to Edinburgh (21 miles away).
Jobs in FK2 work the same way as everywhere else we cover. Jobs here include addresses on Wallacestone Brae, Rosebank Gardens and Crawford Drive and the roads around them. We also cover the places around Wallacestone: Reddingmuirhead (1 mile north-west), Brightons (1 mile east), Redding (1 mile north), California (1 mile south-west) and Rumford (1 mile east). Further out, we also cover Falkirk (3 miles north-west), Bo'ness (6 miles north-east), Larbert (5 miles north-west), Stenhousemuir (5 miles north-west), Denny (7 miles west) and Bonnybridge (6 miles west).
Near you in Wallacestone
We visit homes around Callendar Park, Brightons Parish Church and Graeme High School. The closest station to Wallacestone is Polmont station, about 1 mile north-east. A little further out are Callendar House (1.7 miles north-west) and Falkirk Community Hospital (2.6 miles north-west). Not far away are Callendar Lake and Cockleroy.
Questions from Wallacestone
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
When to call us in Wallacestone
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
These are the problems we are asked about most:
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
- Wear marks under the taps
- Stains that won’t shift
Questions to ask before booking
- How to look after the finish
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- If travel is included in the price
About our accreditations · Every repair comes with a one-year guarantee.
