Falkirk · Scotland
Bath Re-enamelling in Falkirk
Bath re-enamelling across Falkirk and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A roll-top that is seen better days
- Worn patches where water runs and sits
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair cannot fix:
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Bath re-enamelling at your home in Falkirk
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include staining under the taps and around the waste and thin, worn enamel in places, in basins & shower trays, acrylic baths and pressed steel baths.
All our work is covered by a one-year guarantee.
Falkirk and the surrounding area
Falkirk is about 21 miles north-east of Glasgow, in Falkirk. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 50 places across Falkirk. We work right across the region, from Falkirk to Glasgow (about 21 miles away).
Every address in FK2, FK1, FK4 and FK6 is within our area. Jobs here include addresses on High Street, High Station Road and Main Street. Falkirk is on the A9 and A803, which makes it straightforward to reach. Neighbouring places we cover include Bainsford (1 mile north), Carron (2 miles north), Carronshore (2 miles north), Glensburgh (2 miles north-east) and Skinflats (2 miles north-east). We also work in nearby towns such as Bo'ness (7 miles east), Denny (5 miles west), Bonnybridge (4 miles west), Polmont (3 miles east), Brightons (3 miles south-east) and Kinneil (6 miles east).
What’s near Falkirk
In Falkirk, that means homes near Callendar Park, The Goose On Newmarket pub and Comely Park School. Also close by are Falkirk High School (0.7 miles south-west) and St. Francis Xavier's Roman Catholic Church (under half a mile north). Falkirk has its own railway station: Falkirk Grahamston station. Further afield, we also cover the area around Torwood Castle (4 miles north-west) and Falkirk Community Hospital (less than half a mile south-west). Green spaces nearby include Callendar Lake.
FAQs for Falkirk
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can I add another job to the visit?
Of course, and it generally saves money. Send pictures of everything together and we’ll quote them together.
Do you work in Falkirk?
We do. We send a technician to Falkirk for every job, and the price is the same as everywhere else.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your FK2 postcode.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Which areas do you work in?
Everywhere in the UK, Falkirk included. There’s no extra charge for travel.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Nearby places to Falkirk
Other services in Falkirk
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Avoid suction-cup mats
- Don’t leave bottles, razors or sponges standing on the surface
- Do not let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What we’re called out for in Falkirk
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Contact us if you’ve noticed any of these:
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
What your quote should include
- How the room is protected while they work
- How long the guarantee is and what it covers
- Whether a trained technician does the job
- Whether they match the colour on site
What we do, step by step
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take the best part of a day, and you can get on with other things while we are there.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why choose Surface Doctor in Falkirk
- No need to remove anything
- Work done at your home or business
- Colours mixed by hand to suit your surface
- One-year guarantee on every repair
Read our prices page or bath cost comparison.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Falkirk. The price reflects:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- What kind of damage it is
Our prices are the same across the UK, with no extra for Falkirk. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
Photographing the damage takes a minute. Please include:
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
