Buckinghamshire · England
Bath Re-enamelling in Brill
Bath re-enamelling across Brill and nearby, done in a single visit in most cases.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coloured bath you want in white
Bath re-enamelling in Brill without replacing anything
We don’t move the bath, so your taps, tiles and plumbing are left alone. It typically takes one visit, with the bath ready to use the following day. Typical jobs include a roll-top that’s seen better days and a bath in a colour that no longer suits, in acrylic baths, cast iron baths and basins & shower trays.
Every repair comes with a one-year guarantee, wherever you are in Buckinghamshire.
- Location
- Brill (HP18)
- County
- Buckinghamshire
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Fixed prices from your photos
- We leave the room as we found it
- Honest advice, even when it means no job
- Usually one visit, start to finish
Take a look at our pricing or resurfacing vs replacement cost guide.
Landlord and trade work in Brill
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
What happens on the day
Arrival times are agreed in advance. On site, it takes the best part of a day for most jobs. We leave the room clean and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Open a window if you can
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
Do you need bath re-enamelling in Brill?
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, normally first under the taps and around the waste.
Send us a photo if you notice any of these:
- Staining under the taps and around the waste
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
Questions to ask before booking
- Whether a trained technician does the job
- What aftercare is recommended
- Whether the colour is mixed to match
- If travel is included in the price
About Brill
Brill is about 6 miles north-west of Thame, in Buckinghamshire. Our repair technicians come to homes and businesses in Brill and the surrounding area, so there’s no workshop to go to. Brill is one of 263 towns and villages in Buckinghamshire where we work. Our nearest city page is London, about 47 miles away.
Postcode districts we cover here: HP18. We regularly work on streets such as High Street, The Square and Brae Hill and the roads around them. We also cover the places around Brill: Little London (1 mile south-west), Oakley (1 mile south-west), Piddington (2 miles north), Ludgershall (2 miles north) and Blackthorn (4 miles north-west). Larger places within reach include Aylesbury (10 miles east), Buckingham (13 miles north), Elmhurst (10 miles east), Southcourt (10 miles east), Princes Risborough (12 miles south-east) and Haydon Hill (9 miles east).
Local landmarks in Brill
Our customers here include homes close to The Red Lion pub, United Reformed Church and Brill Church of England School and the streets around them. The countryside around Brill includes Bernwood Meadows.
Nearby places to Brill
Other services in Brill
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Wash away dyes and oils after use
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
- Have chips seen to early
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
When a repair is not the answer
We won’t take on work that will not last, so these are the limits:
- Problems we cannot see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Questions from Brill
Can you price it without visiting?
In nearly every case. If photos do not show enough, we will ask for another angle.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item and your postcode.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
About our accreditations · Every repair comes with a one-year guarantee.
