North Somerset · England
Bath Re-enamelling for Brinsea homes
Bath re-enamelling across Brinsea and nearby, generally in one visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- An old resurfacing that’s failing
Bath re-enamelling in Brinsea without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re frequently asked to fix a bath that stays dull however much you clean it and lots of chips and rust spots, across basins & shower trays, acrylic baths and pressed steel baths.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Brinsea (BS49)
- Region
- North Somerset
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
About Brinsea
Brinsea is about 6 miles south of Nailsea, in North Somerset. Jobs in Brinsea are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We work in 86 places in North Somerset.
Every address in BS49 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Honey Hall (1 mile south-west), Congresbury (1 mile north), Sandford (2 miles south-west), Nye (2 miles west) and Star (2 miles south). Further out, we also cover Weston-super-Mare (6 miles west), Portishead (9 miles north), Clevedon (6 miles north), Nailsea (6 miles north), Milton (6 miles west) and Yatton (3 miles north).
Around Brinsea
Typical jobs here are in homes near Church of St John the Baptist, Churchill Academy & Sixth Form and Churchill Church of England Primary School, among other places. The nearest railway station is Yatton station, about 2.9 miles north-west of the centre. Other landmarks nearby include Banwell Castle (3 miles south-west) and Banwell Museum (3.2 miles south-west). Green spaces nearby include Kingswood and Cadbury Hill.
How the visit works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to most of the day, tidy-up included.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Make sure the area is dry
- Tell us about parking, stairs or access
- Open a window if you can
Ask for a price
For a price in Brinsea, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
Brinsea: your questions answered
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
What happens once I’ve sent pictures?
You will get a fixed quote back, plus dates. You’re under no obligation.
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do you resurface freestanding baths?
Yes. Inside and out.
Do you cover the whole of North Somerset?
Everywhere in the UK, Brinsea included. Travel is included in the price.
How much does bath re-enamelling cost in Brinsea?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your BS49 postcode.
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Why Brinsea clients choose us
- Work done at your home or business
- Colours mixed by hand to suit your surface
- One price list for the whole UK
- Rooms protected and left tidy
See our full price list or guide to resurfacing and replacement costs.
Towns and villages near Brinsea
Also in Brinsea
What we can’t put right
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- A bath split right through the body
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Signs you need bath re-enamelling in Brinsea
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
It’s worth getting a quote if you see:
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- Wear marks under the taps
- A roll-top that’s seen better days
What your quote should include
- When it can be used again
- What protection goes down before work starts
- What preparation is included
- What the guarantee covers, and for how long
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Do not let dyes or oils sit on the finish
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
- Respect the curing time we give you
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
