Norfolk · England
Bath Re-enamelling in Brinton
Bath re-enamelling in Brinton without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Wear marks under the taps
- A period or roll-top bath worth keeping
Bath re-enamelling in Brinton, done in place
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We’re often asked to fix brown or grey marks that don’t clean off and several chips and rust patches, across pressed steel baths, basins & shower trays and Victorian roll-tops.
Every repair is covered by our one-year guarantee.
- Area
- Brinton (NR24)
- Region
- Norfolk
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Brinton
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What areas do you cover?
Across the UK, so Brinton is covered. Our prices are the same everywhere.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we will ask.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- How much damage there is
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- Unusual colours or finishes
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what helps:
- Any earlier repairs or coatings
- Natural light rather than flash
- A clear, close picture of the problem area
- Where you are, by postcode
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Covering Brinton
Brinton is about 15 miles north of Dereham, in Norfolk. Whether you’re in the middle of Brinton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 797 towns and villages in Norfolk.
Our repair technicians cover all of the NR24 postcode area and the streets around it. Streets in the area include The Street and Stody Road. Neighbouring places we cover include Sharrington (1 mile north), Thornage (1 mile north-east), Briningham (1 mile south), Stody (1 mile east) and Hunworth (2 miles east). Larger places within reach include Dereham (15 miles south), North Walsham (15 miles east), Sheringham (9 miles north-east), Taverham (15 miles south-east), Cromer (12 miles east) and Fakenham (8 miles south-west).
What’s near Brinton
Locally, our jobs take us to homes close to Church of St Andrew. A little further out are Hunworth Castle Hill (2.1 miles east) and The Shell Museum (3.5 miles north). For a walk, there is Thursford Wood.
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
What you get with us
- Work done at your home or business
- Fixed prices from your pictures
- No need to remove anything
- No extra charge for your area
See our pricing or resurfacing vs replacement cost guide.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Towns and villages near Brinton
More services for Brinton
Looking after it afterwards
It’s all simple stuff:
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
Wipe the bath dry after use where you can, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
How the visit works
Here’s how a visit usually runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow most of the day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the following day.
Before we arrive
- Ensure the area is dry
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
What a repair can’t fix
We’d rather lose a job than do one that won’t last, so these are the limits:
- A bath that is rusted through
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we will say what we think.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Do you need bath re-enamelling in Brinton?
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Signs it’s time to call us include:
- A roll-top that is seen better days
- A dull, rough surface that will not come clean
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
What your quote should include
- How changes to the job are handled
- How the colour is matched
- Aftercare advice
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
