Norfolk · England
Bath Re-enamelling for Hunworth homes
We travel to Hunworth for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Landlords, letting agents and housing providers in Hunworth use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Bath re-enamelling at your home in Hunworth
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We’re frequently asked to fix enamel that’s lost its shine and feels rough and lots of chips and rust spots, across basins & shower trays, cast iron baths and pressed steel baths.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Location
- Hunworth (NR24)
- Area hub
- Norfolk
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
A few problems are outside what a surface repair can do:
- Problems we can’t see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
Send us photos and we will tell you honestly.
What we work on
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Nearby places to Hunworth
What else we do in Hunworth
What happens on the day
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
How to prepare
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Open a window if you can
How to get a price
For a price in Hunworth, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Why book with us
- Dust sheets down, tidy finish
- Work done at your home or business
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
Read our full price list and bath cost comparison.
Our work in Hunworth
Hunworth is about 14 miles west of North Walsham, in Norfolk. Anywhere in NR24, a technician comes to you. Hunworth is one of 797 towns and villages in Norfolk we cover.
Jobs in NR24 are booked in the same way as anywhere else. That includes homes on Kings Street and Hunworth Road and the roads around them. If you are just outside Hunworth, we cover Stody (1 mile west), Thornage (1 mile north-west), Briston (2 miles south), Brinton (2 miles west) and Melton Constable (2 miles south-west). We also work in nearby towns such as Dereham (15 miles south), North Walsham (14 miles east), Sheringham (7 miles north-east), Taverham (14 miles south), Cromer (10 miles east) and Fakenham (10 miles west).
What’s near Hunworth
Typical jobs here are in homes near St Lawrence Parish Church and the streets around them. Further afield, we also cover the area around William Marriott Museum (3.2 miles north-east) and Hunworth Castle Hill (within half a mile south-east). Open spaces near Hunworth include Kelling Heath.
How to care for the repair
Simple care helps the repair last. Our advice:
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
- A quick wipe after use keeps limescale away
- Do not leave bottles, razors or sponges standing on the surface
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Common questions in Hunworth
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you price it without visiting?
Usually, yes. Clear photos let us give you a fixed quote without visiting.
How much does bath re-enamelling cost in Hunworth?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your NR24 postcode.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Hunworth. The price reflects:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How much damage there is
- How easy the damage is to reach
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Before you send pictures, these tips help us give you a firm price:
- A wider photo showing the whole bath
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
When to call us in Hunworth
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Signs it’s time to call us include:
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
Questions to ask before you book
- How your room will be protected
- What preparation is included
- When it can be used again
- Aftercare advice
About our accreditations · Every repair comes with a one-year guarantee.
