Lancashire · England
Bath Re-enamelling in Britannia
Bath re-enamelling in and around Britannia: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that is failing
- An outdated colour you’d like to change
Honest limits
A few problems are outside what a surface repair can do:
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly before booking.
Materials we work on in Britannia
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Bath re-enamelling at your home in Britannia
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. If you’re dealing with an outdated colour you’d like to change and a bath that stays dull however much you clean it, we can help, on pressed steel baths, basins & shower trays and Victorian roll-tops alike.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Britannia (OL13, OL12)
- Region
- Lancashire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Repair dripping taps early
- Rinse off hair dye, oils and bath bombs straight away
- Get any chip repaired quickly
- Avoid suction-cup mats
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Do you need bath re-enamelling in Britannia?
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Common reasons people in Britannia contact us are:
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
What your quote should include
- Who turns up on the day
- How the colour is matched
- How long the guarantee is and what it covers
- Whether the price covers travel
How it works
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It normally takes the best part of a day, and you can get on with other things while we are there.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
How to get a price
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Related advice
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Britannia
- Most jobs done in one visit
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Rooms protected and left tidy
Take a look at our prices page or guide to resurfacing and replacement costs.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Unusual colours or finishes
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- The material
A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- The material, if you know it
- Natural light rather than flash
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Britannia: your questions answered
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
More services for Britannia
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams in Lancashire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Britannia and nearby
Britannia is about 1 mile south-east of Bacup, in Lancashire. We travel to homes and businesses in Britannia and the surrounding area, so nothing has to leave your home. We work in 482 places across Lancashire. Our nearest city page is Manchester, about 15 miles away.
We work across the OL13 and OL12 postcode area. Streets in the area include Old Lane, Edge Lane and Tong Lane, and we cover them all. Other places close to Britannia include Shawforth (1 mile south-east), Bacup (1 mile north-west), Whitworth (2 miles south), Walsden (3 miles east) and Broadley Fold (3 miles south). Further out, we also cover Burnley (8 miles north), Accrington (9 miles north-west), Nelson (10 miles north), Rawtenstall (5 miles west), Colne (12 miles north) and Clitheroe (15 miles north-west).
What’s near Britannia
In Britannia, that means homes near Britannia Community Primary School and the streets around them. The closest station to Britannia is Walsden station, roughly 2.9 miles east of the centre. Other landmarks nearby include Dobroyd Castle (3.1 miles north-east) and Birch Hill Hospital (4.1 miles south-east). Open spaces near Britannia include Hail Storm Hill.
About our accreditations · Every repair comes with a one-year guarantee.
