Oxfordshire · England
Bath Re-enamelling in Britwell Salome
Full bath re-enamelling and resurfacing in Britwell Salome, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- Lots of chips and rust spots
How we handle bath re-enamelling in Britwell Salome
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you’re dealing with wear marks under the taps and chips and rust in more than one place, we can generally put it right, whatever the material.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Where
- Britwell Salome (OX49)
- County
- Oxfordshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Britwell Salome
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
What you get with us
- No extra charge for your area
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- Typically one visit, start to finish
Read our pricing and bath cost comparison.
How to care for the repair
A little care keeps the finish looking good. We recommend:
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
- Do not let dyes or oils sit on the finish
- Respect the curing time we give you
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
FAQs for Britwell Salome
Do you come to Britwell Salome?
Yes, we do. Technicians travel to Britwell Salome from across the region, and the price is the same as everywhere else.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your OX49 postcode.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
What happens once I’ve sent photos?
We review the photos and send a fixed quote with dates.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
When to call us in Britwell Salome
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Most people get in touch after spotting something like this:
- A roll-top that is seen better days
- Stains that won’t shift
- A coloured bath you want in white
- A dull, rough surface that will not come clean
What your quote should include
- What preparation is included
- Whether the price is fixed and includes VAT
- Who turns up on the day
- When it can be used again
Covering Britwell Salome
Britwell Salome is about 8 miles south of Thame, in Oxfordshire. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. Britwell Salome is one of 443 towns and villages in Oxfordshire we cover. You can also see our page for London, about 41 miles away.
We cover every part of OX49 and the streets around it. From Turners Green and Turner's Green Lane or anywhere nearby, a technician can come to you. With the B4009 close by, Britwell Salome is simple for us to get to. Neighbouring places we cover include Watlington (1 mile north-east), Brightwell Baldwin (1 mile north-west), Ewelme (2 miles south-west), Pyrton (2 miles north-east) and Roke (3 miles west). Larger places within reach include Oxford (12 miles north-west), Didcot (9 miles west), Abingdon-on-Thames (11 miles west), Thame (8 miles north), Henley-on-Thames (9 miles south-east) and Benson (3 miles west).
Near you in Britwell Salome
Typical jobs here are in homes near Icknield Community College, Church of St Nicholas and The Red Lion Inn Public House. Other landmarks nearby include Wallingford Castle (4.4 miles south-west). Not far away are Ewelme Watercress Beds and Bald Hill.
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Britwell Salome. The price comes down to:
- How many areas need work
- Where the damage is and how we get to it
- Whether we combine several jobs
- The material
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Send photos for a quote
Two or three clear photos are typically enough. Try to include:
- The postcode, so we can plan the visit
- Any details about the material
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
If you are in Britwell Salome and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Places near Britwell Salome
Also in Britwell Salome
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take the best part of a day, and you’re welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the day after.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.
Read more
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
