Oxfordshire · England
Bath Re-enamelling for Pyrton homes
Bath re-enamelling in and around Pyrton: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath in a colour that no longer suits
What we cannot put right
Before booking, it’s worth knowing the limits:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
How we handle bath re-enamelling in Pyrton
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Common call-outs are for staining under the taps and around the waste and an original cast iron bath that needs restoring, across pressed steel baths, Victorian roll-tops and basins & shower trays.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Pyrton (OX49)
- Region
- Oxfordshire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath re-enamelling in Pyrton
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Are there extra charges for Pyrton?
Travel is included in the price, and we charge the same wherever you are.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Which areas do you work in?
Everywhere in the UK, Pyrton included. Travel is included in the price.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Our work in Pyrton
Pyrton is about 6 miles south of Thame, in Oxfordshire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Pyrton is one of 443 towns and villages in Oxfordshire where we work. We work right across the region, from Pyrton to London (about 41 miles away).
Every address in OX49 is within our area. Neighbouring places we cover include Watlington (1 mile south), Britwell Salome (2 miles south-west), Brightwell Baldwin (2 miles west), Chalgrove (3 miles west) and Ewelme (4 miles south-west). Within a short drive, we also cover Oxford (12 miles north-west), Didcot (11 miles west), Abingdon-on-Thames (12 miles west), Thame (6 miles north), Henley-on-Thames (10 miles south-east) and Benson (5 miles south-west).
Local landmarks in Pyrton
In Pyrton, that means homes near St Mary's Church, Icknield Community College and The Chequers pub, among other places. Other local landmarks include Watlington Primary School (0.5 miles south) and All Saints Church (0.6 miles east). Not far away are Aston Rowant NNR and Bald Hill.
Common problems we fix in Pyrton
Frequently the bath has just had decades of use. The body of the bath is usually perfectly sound.
Common reasons people in Pyrton contact us are:
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
- Stains that won’t shift
What to look for in a quote
- Whether a trained technician does the job
- Aftercare advice
- How your room will be protected
- Whether cleaning and preparation are in the price
Looking after it afterwards
To keep it looking its best for years:
- Rinse off hair dye, oils and bath bombs right away
- Don’t use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for most of the day from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
Get a quote
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Landlord and trade work in Pyrton
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Pyrton, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- What the surface is made of
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
We charge the same wherever you are, so there is no premium for Pyrton. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- Natural light rather than flash
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Nearby places to Pyrton
More services for Pyrton
About our accreditations · Every repair comes with a one-year guarantee.
